how to remove a pop up drain

Easy Drain Pop Up Removal: Step-by-Step Guide

By Thomas Robinson
AD

lxpIf you're dealing with a clogged pop-up drain or sink, you're not alone. This common plumbing issue can be a real nuisance, but it's often easier to fix than you might think. By understanding how to remove a pop-up drain, you can save time and money while enjoying the convenience of a properly functioning sink. Let's dive into step-by-step instructions and some helpful tips to tackle this problem like a pro.

Before we get started, it's essential to understand what a pop-up drain is and how it works. A pop-up drain includes a spring-lever mechanism that allows the drain to 'pop up' or 'down' to control water flow. The most common types are balled and cased pop-up drains. In this article, we'll focus on removing and cleaning the drain to solve common clogging issues.

Identifying the Problem

Before attempting to remove a pop-up drain, it's crucial to identify the root cause of the problem. Generally, clogs occur due to a buildup of hair, soap residue, or other debris. Other issues might include a broken or damaged drain assembly, or a sink that needs to be vented properly.

AD
How to remove WATCO Pop-up Shower Drain
How to remove WATCO Pop-up Shower Drain
How To Unclog A Drain With A Wet/Dry Vacuum
How To Unclog A Drain With A Wet/Dry Vacuum
How to Replace a Pop-Up Sink Drain - HandyManHowTo
How to Replace a Pop-Up Sink Drain - HandyManHowTo

Begin by examining the pop-up rod, located in the overflow opening. If the rod is malfunctioning or broken, the drain might not open or close appropriately, leading to clogs. Additionally, check for any obvious damage to the drain or assembly.

Gathering Tools and Materials

To remove a pop-up drain, you'll need a few essential tools and materials. Here's a list to ensure you're well-prepared:

So Easy! How to Remove a WATCO Pop-up Drain Plug
So Easy! How to Remove a WATCO Pop-up Drain Plug
How to Unclog a Toilet, Sink or Drain
How to Unclog a Toilet, Sink or Drain
  • Adjustable wrenches
  • Pliers
  • Flathead screwdriver
  • Needle-nose pliers
  • Bottle brush (for cleaning the drain) or flexible wire

    White vinegar (for removing odors and buildup)

  • Baking soda (for clearing clogs)

Preparing the Work Area

Before you start, spread an old towel or place a bucket underneath the sink to catch any water or debris that may fall out during the process.

Next, turn off the water supply to the sink to prevent any unwanted water from escaping while you're working. You can usually find the valves under the sink. Once the water is turned off, open the faucet to drain any remaining water in the pipes.

AD

Removing the Pop-Up Drain

Now that you've identified and prepared for the task at hand, it's time to remove the pop-up drain. This section will guide you through the process step-by-step.

Accessing the Pop-Up Rod

First, reach into the overflow hole and located the pop-up rod. Use a flathead screwdriver or needle-nose pliers to carefully unscrew the setscrew that holds the rod in place. This should allow the rod to pivot freely.

Next, twist the pop-up rod in the direction that opens the drain to its fully open position. Then, slide the rod upward to remove it from the drain assembly.

AD

Disassembling the Drain

Now that the pop-up rod is removed, it's time to disassemble the drain. Use adjustable wrenches to loosen and remove the large nut under the sink that secures the drain to the sink mounting assembly. With the nut removed, you should be able to unscrew the drain and lift it out of the sink.

If you're working with a ball-and-chain type pop-up drain, you may need to slide the ball out of the RodCup before removing the drain. You can do this by sliding the drain assembly upward while applying gentle pressure to the ball.

Cleaning the Pop-Up Drain

With the drain removed, it's an excellent opportunity to clean it thoroughly. Begin by soaking the drain in a solution of warm water and white vinegar for about 15-20 minutes to help break down any grease or residue.

AD

Using a bottle brush or flexible wire, scrub the entire drain, including the chain, ball, and RodCup, to remove any buildup. You can also sprinkle some baking soda into the mixture and let it sit for a few minutes before scrubbing to help clear any clogs.

Reassembling and Testing the Pop-Up Drain

After cleaning the drain, it's time to reattach it and test the mechanism to ensure everything is working correctly.

Replacing the Drain

Begin by placing the drain back into the sink's mounting hole. Ensure that the RodCup is properly positioned and aligned with the pop-up rod.

Thread the large nut back onto the drain and use adjustable wrenches to tighten it securely, but avoid overtightening to prevent breakage.

Reinstalling the Pop-Up Rod

Next, reinsert the pop-up rod into the RodCup and position it so the drain is in the closed position. Reach into the overflow hole and reinsert the setscrew to secure the rod in place.

Test the mechanism by lifting the rod to open and close the drain several times. It should operate smoothly, without any obstruction or binding.

Clearing Persistent Clogs

If you're still experiencing drain clogs after cleaning and reassembling the pop-up drain, there might be a more significant issue at hand. In these cases, consider using a drain snake or calling a professional plumber to inspect the pipes further.

Regular maintenance is the key to preventing drain clogs and ensuring your sink operates smoothly. Be sure to clean your pop-up drain regularly and avoid pouring grease, oil, and large food particles down the sink to keep it in optimal working condition.

Congratulations! You've now successfully learned how to remove a pop-up drain and troubleshoot common clogging issues. By staying proactive and addressing minor problems promptly, you can save yourself the hassle and expense of major repairs down the line. Happy DIY plumbing!

AD