Removing Kwikset Deadbolt Keyed on Both Sides: Step-by-Step
Removing a Kwikset deadbolt that's keyed on both sides can be a straightforward process, once you understand the mechanism. This guide will walk you through the steps, ensuring you'll be able to remove your lock safely and efficiently. Remember, if you're unsure at any point, it's always best to call a professional locksmith.
Before you begin, ensure you have the right tools. You'll need an Allen wrench (usually included with the lock) and, optionally, a lock removal tool for added leverage. It's also a good idea to have a replacement lock on hand if you're upgrading.
Understanding Your Kwikset Deadbolt
Kwikset deadbolts are typically secured by a faceplate on the interior side. This faceplate covers the lock's interior and needs to be removed to expose the lock mechanism. The faceplate is usually secured by one or two screws.
Additionally, understand that there are different styles of Kwikset deadbolts. This guide assumes you're working with a standard sheer-keyway deadbolt. If your lock has a SmartKey feature, or is a tubular or a universal lock, the process may differ slightly.
Preparing the Interior Side
Start by removing the faceplate from the interior side of the door. This will expose the lock mechanism and allow you to remove the deadbolt.
Use the Allen wrench to turn the lock to the unlocked position. Then, slowly retract the deadbolt using the thumbturn or the key. Once the deadbolt is fully retracted, you should be able to remove the faceplate by unscrewing it from the door.
Removing the Deadbolt Cylinder
The deadbolt itself is attached to a cylinder that contains the lock's mechanism. This cylinder needs to be removed before you can pull out the deadbolt.
Using the Allen wrench, turn the knob or key in the exterior cylinder counterclockwise until it won't turn anymore. This will unlatch the deadbolt and free it from any snapped-in components. With the deadbolt still retracted, twist the cylinder counterclockwise, and it should pop out.
Removing the Deadbolt
Now that the cylinder is out, removing the deadbolt itself is simple. With the deadbolt still retracted, gently pull it out of the door. It should come out easily, as it's no longer secured by the cylinder.
If you're having trouble, it might help to use a lock removal tool. These tools provide extra leverage and can help you pry the deadbolt out if it's being stubborn.
Inspecting the Door and Latch Area
Before installing the new lock, it's a good idea to inspect the door and the latch area. Ensure there's no damage to the door or frame, and clean any dirt or debris from the area.
If you're replacing the lock with the same size, you can usually reuse the mounting hole. However, if you're installing a new size, you may need to drill new holes. Make sure to use the correct size bits to avoid damaging your door.
That's it! You've successfully removed your Kwikset deadbolt. If you're installing a new one, make sure to follow the manufacturer's instructions to ensure a proper fit and secure installation. Happy DIYing!