how to remove a double keyed deadbolt without visible screws

How to Remove a Double Cylindrical Deadbolt without Visible Screws

By Laura Anderson
AD

Ever found yourself in a pickle, staring at a double-keyed deadbolt without a single visible screw in sight? You're not alone. Many homeowners and DIY enthusiasts face this conundrum, but don't panic, it's not a hopeless situation. With the right techniques, you can tackle this challenge and regain control over your locks. Let's explore how to remove a double-keyed deadbolt without visible screws, step by step.

Remember, patience and precision are key here. This process might require a bit of extra effort and time, but with the right tools and techniques, you can successfully remove that deadbolt and get your locks working smoothly again.

The Hidden Screw Fasteners

Before we dive into the removal process, you need to understand that double-keyed deadbolts often use hidden, or non-standard, screw fasteners. These could be located on the side of the lock mechanism, or even hidden underneath decorative cover plates. The goal is to find and unscrew these hidden fasteners. They're there, just not as obvious as traditional screws.

AD
Removing a double keyed deadbolt without screws
Removing a double keyed deadbolt without screws
How To Remove A Deadbolt Lock Without Screws - Hunker
How To Remove A Deadbolt Lock Without Screws - Hunker
How To Remove Lori Double Cylinder Deadbolt | Mr. Locksmith™ Video
How To Remove Lori Double Cylinder Deadbolt | Mr. Locksmith™ Video

First, let's look at where these hidden screws might be located:

  • Inside the lock cylinder: Some locks hide the fasteners inside the cylinder itself. To access these, you might need to remove the lock cylinder using specialized tools.
  • Under decorative cover plates: Check for any removable decorative plates on your door. These could be hiding the screws you're looking for. Remove these plates to gain access to the hidden fasteners.
  • On the lock mechanism: Sometimes, the screws can be found on the edge of the lock mechanism. You might need to remove the entire mechanism from the door to access these screws.

Using a Multipurpose Tool

One common method to find and remove these hidden fasteners is to use a multipurpose tool or a set of Allen wrenches. These tools are designed to address various hex and non-standard screw heads. Follow these steps:

How do I remove a Kwikset deadbolt with no screws on the inside plate?
How do I remove a Kwikset deadbolt with no screws on the inside plate?
Home Repair & Maintenance : How to Replace a Deadbolt Lock
Home Repair & Maintenance : How to Replace a Deadbolt Lock

Start by examining your lock and looking for any hex-shaped recesses. Insert an Allen wrench into these recesses and turn. If you feel resistance, you've likely found a hidden screw. Tighten until the screw is fully seated, then back it out. Repeat this process until all hidden screws are removed.

Extracting the Lock Mechanism

In some cases, you might not have luck with a multipurpose tool. In that case, you'll need to extract the entire lock mechanism from the door. This allows you to access the hidden screws from a different angle. Here's how:

AD

First, remove any decorative plates or faceplates using a flathead screwdriver or a pick tool. Next, use a pick tool or a narrow chisel to gently pry the lock mechanism away from the door edge. Be careful not to damage the door or the lock mechanism. Once you've created enough space, use pliers or a multi-tool to grip and pull the lock mechanism out.

Removing the Deadbolt

Now that you've successfully removed the hidden screws, it's time to remove the deadbolt itself. This process will vary slightly depending on the type of deadbolt you have. Here are two common scenarios you might encounter:

Standard Deadbolts

Standard deadbolts typically have a latch that you can turn to release the deadbolt. Once you've removed the lock mechanism from the door, you should see this latch. Turn the latch counter clockwise to release the deadbolt from the strike plate on the doorframe. Then, gently pull the deadbolt out of the door.

AD

Deadbolts with Setscrews

Some deadbolts have setscrews that secure the deadbolt in place. If your deadbolt doesn't release easily, look for these setscrews. They're usually located on the back of the deadbolt, near the latch. Use an Allen wrench or a screwdriver to loosen and remove these setscrews. Once they're gone, you should be able to pull the deadbolt out of the door.

Remember, if at any point you feel you're damaging the door or the lock, or if you're unsure about any step, don't hesitate to call a professional locksmith. It's always better to err on the side of caution when dealing with your home's security.

In many cases, removing a double-keyed deadbolt without visible screws is a simple matter of finding and removing the hidden fasteners. With patience, the right tools, and a thorough understanding of your lock mechanism, you can successfully tackle this project and gain control over your locks. So, grab your tools and get ready to unlock your door to a new skill - literally!

AD
AD