how to remove a delta bathtub faucet

How to Remove a Delta Bathtub Faucet: Step-by-Step Guide

By Amanda Young
AD

Tackling a bathroom renovation project? One of the most satisfying aspects is replacing old fixtures, like your bathtub faucet. If you're the proud owner of a Delta bathtub faucet, you're in luck. Delta's products are renowned for their quality and durability, but sometimes, a change is necessary. Here's a comprehensive guide on how to remove a Delta bathtub faucet, designed to make your DIY endeavor a success.

Before you start, ensure you have the right tools and materials. You'll need a flathead screwdriver, an adjustable wrench, channel-lock pliers, a basin wrench, and a towel to catch any water. It's also a good idea to keep a flashlight handy for better visibility.

Preparation and Initial Removal

Prepare your workspace by clearing the area around the bathtub and turning off the water supply. Locate the water supply valves, typically found near the bathtub or behind access panels, and turn them clockwise to shut off the water.

AD
How to Remove Your Delta Shower Handle: A Complete Guide
How to Remove Your Delta Shower Handle: A Complete Guide
Dealing with a stuck Delta shower handle? No stress, here’s how to get it off!
Dealing with a stuck Delta shower handle? No stress, here’s how to get it off!
Delta tub faucet drip repair
Delta tub faucet drip repair

Use an adjustable wrench to loosen and remove the bathtub's faucet handle. Usually, Delta faucets have handles that screw onto the faucet body. Hold the stem with a wrench and turn the handle counterclockwise to remove it.

Removing the Faucet Aerator

The aerator is the screen at the faucet's tip. It improves water flow but can collect mineral deposits over time. Use tweezers or needle-nose pliers to carefully remove it. If it's stubborn, wrap it in a cloth and grip it tighter with your pliers. There may be a retaining ring that needs to be removed as well. Consult your Delta faucet's manual for specific instructions.

How To 008 - Leaking Bathtub Faucet & Delta Handle Removal
How To 008 - Leaking Bathtub Faucet & Delta Handle Removal
a person fixing a faucet in a sink
a person fixing a faucet in a sink

Once the aerator is off, you should be able to see the faucet stem more clearly. Some Delta faucets might have a cap or ornament on the stem. Use a flathead screwdriver to pry it off if necessary.

Disconnecting the Water Supply Lines

Above the faucet, there are supply lines connected to the plumbing. Use a basin wrench to loosen and remove these lines. A basin wrench is specifically designed to reach into tight spaces and can be adjusted to fit different sizes. Turn the line counterclockwise while ensuring you're able to reach the nipple firmly.

AD

Be prepared for water drips, even though you've turned off the supply. Use a towel to catch any residual water while you work.

Removing the Delta Faucet from the Bathtub

Now that the water supply lines are disconnected, you're ready to remove the faucet from the bathtub. Before proceeding, double-check that the faucet is completely loosened from the bathtub's plumbing. You might need to use a flashlight to see if any screws or bolts are still holding it in place.

Most Delta bathtub faucets have mounting nuts or bolts. Use channel-lock pliers to loosen and remove these. Sometimes, you might need to use a wrench, depending on the design. Keep in mind that these nuts or bolts can be quite tight, so be patient and apply firm but careful pressure.

AD

Removing the Bathtub Spout

The bathtub spout is typically attached to the main faucet body with either a set screw or a retaining clip. Use a flathead screwdriver to remove the set screw, or use needle-nose pliers to remove the retaining clip. Some Delta faucets might require the use of a special tool for removal, so consult your manual for specific instructions.

Once the spout is loose, you can carefully pull it away from the bathtub. If it's stuck, you might need to apply gentle force, but be careful not to damage the finish or the plumbing.

Removing the Main Faucet Body

With the spout removed, you should now be able to lift the main faucet body out of the bathtub. There might be some gaps or channels at the bottom of the faucet that can help you grip it more securely. Gently lift the faucet up and out of the bathtub hole.

AD

If the faucet is still stuck, or if you encounter resistance, stop immediately. You might have missed a retaining screw or bolt. Double-check that all parts are fully disconnected and remove any remaining debris from the tub hole before attempting removal again.

Congratulations, you've successfully removed your Delta bathtub faucet! Now, you're ready to install your new faucet, ensuring that you reconnect all parts correctly and turn on the water supply valves slowly to avoid any potential leaks or issues. Don't forget to test your new fixture to ensure it's functioning properly.

AD