how to remove a built in refrigerator

Step-by-Step Guide: Remove a Built-In Refrigerator Safely

By Joseph Brown
AD

Moving your built-in refrigerator? While it's possible, it's essential to approach this task with care. Built-in refrigerators, also known as integrated refrigerators, are designed to fit seamlessly into your cabinets, often with the doors matching the surrounding cabinetry. Removing one requires patience, the right tools, and careful attention to avoid damage to your appliance and your kitchen. Let's delve into the step-by-step process.

Before you begin, remember that built-in refrigerators are heavy and cumbersome. It's crucial to have a helper to assist you. Also, disconnecting the refrigerator may cause temporary food spoilage, so plan to keep your food in coolers during the process. Now, let's get started.

Preparation for Removal

Before touching your refrigerator, ensure you're well-equipped. Here's what you'll need:

AD
How to Make Your Refrigerator Look Built-In – Easy DIY!
How to Make Your Refrigerator Look Built-In – Easy DIY!
How To Remove The Ice Maker From A Bosch Refrigerator
How To Remove The Ice Maker From A Bosch Refrigerator
Our Built-In Fridge Fiasco - Redhead Can Decorate
Our Built-In Fridge Fiasco - Redhead Can Decorate
  • Penetrating oil - to help release stubborn screws and hinges.
  • Screwdrivers - both Phillips and flathead, depending on your refrigerator's hardware.
  • Adjustable wrenches - forpring clamps and other hard-to-reach screws.
  • Cordless drill - to make the task easier.
  • Vacuum - to clean up any debris.

Disconnect and Unplug

First, turn off the power to your refrigerator at the circuit breaker. Then, unplug the unit from the power source.

Next, turn off the water supply valve if your refrigerator has an icemaker. detachment of the waterline connects to the supply valve, usually located behind or below the refrigerator. Using a wrench, turn the valve counterclockwise to shut off the water.

an empty kitchen with the words, this looks cheap on it's door and cabinets
an empty kitchen with the words, this looks cheap on it's door and cabinets
How to Trim Out a Refrigerator (Step by Step)
How to Trim Out a Refrigerator (Step by Step)

Remove Obstacles and Bracing

Some refrigerators are secured to the cabinet frame with screws or brackets. You'll need to remove these before proceeding. Use a screwdriver or drill to remove the screws and brackets, keeping them organized for when you reinstall the refrigerator in its new location.

If your refrigerator was bracket-mounted, you may need to remove the bracket by drilling out the mounting screws. This can be a labor-intensive task, so take your time and wear eye protection.

AD

Disconnect Internal Connections

Next, you need to disconnect the refrigerator from its internal connections. This includes both electrical and waterline connections.

To disconnect the waterline, you'll need to remove the.grid from the back of the refrigerator. This is usually accomplished by removing a few screws and pulling the grill off. Once the grill is removed, use a wrench to disconnect the waterline from the back of the refrigerator.

Remove the Doors

Before you begin removing the refrigerator itself, you should remove the doors and any other panels that could get in the way. The process for removing the doors will depend on your specific refrigerator model, but it often involves removing screws or pins that hold the doors in place.

AD

consult your refrigerator's owner's manual for specific instructions. Once the doors are off, label them and lay them face up on a soft surface to prevent damage.

Slide Out and Remove the Refrigerator

Finally, it's time to slide the refrigerator out of its cabinet niche. This may require some wiggling and maneuvering, as the refrigerator is likely quite snug. If you're having difficulty, you can apply penetrating oil to the sides of the refrigerator to help it slip out more easily.

Once the refrigerator is out, carefully pull it out of the cabinet and onto a dolly or furniture sliders. If you're moving the refrigerator to a new location in your home, now is the time to do so.

AD

If you've followed these steps carefully, your built-in refrigerator should be successfully removed from its cabinet niche. The final step is to reinstall the refrigerator at its new location, making sure to reattach all waterlines and electrical connections, as well as any brackets or screws that were removed. With patience and careful planning, your refrigerator removal project can be a success.

Remember, always consult your refrigerator's owner's manual for specific instructions related to your model. If you're unsure about any step, don't hesitate to contact a professional for assistance. Happy moving, and may your new kitchen layout inspire many delicious meals!

AD