how to remove a broken bleeder screw

Fix Broken Bleeder Screw: Simple Steps to Remove

By Robert Lewis
AD

Have you found yourself in a situation where your vehicle's brakes aren't working properly, only to discover a broken bleeder screw is to blame? Don't panic, you can fix this issue yourself with the right tools and some patience. In this guide, we'll walk you through the process of removing a broken bleeder screw, ensuring you'll be back on the road in no time.

Before we dive in, it's crucial to understand that working with your vehicle's brake system requires careful attention to detail. If you're unsure about any step, it's always best to consult a professional mechanic. Now, let's get started with gathering your tools and preparing for the task.

Gathering Your Tools

Assembling the necessary tools is the first step in removing a broken bleeder screw. Here's a list of everything you'll need:

AD
How to Remove a Broken Screw
How to Remove a Broken Screw
How to Remove a Stuck Brake Bleeder Screw
How to Remove a Stuck Brake Bleeder Screw
4 Methods to Remove a Stripped or Broken Screw • 1001 Pallets
4 Methods to Remove a Stripped or Broken Screw • 1001 Pallets
  • Adjustable wrench or channel-lock pliers
  • Flashlight
  • C-clamp or brake bleeder tool
  • Clear hydraulic fluid
  • Brake bleeding kit (optional)
  • Safety glasses
  • Gloves

Preparing Your Vehicle

Before you begin, make sure to park your vehicle on a flat, stable surface and allow the brakes to cool down if you've been driving. Using a jack, safely lift the vehicle and secure it on jack stands. This will give you better access to the brakes and provide a stable working environment.

Locating the Bleeder Screw

The bleeder screw should be located near the brake caliper or wheel cylinder, connected to the flexible brake line. Use a flashlight to locate it, as it may be hidden behind other components. Once you've found it, you'll need to determine which type of bleeder screw you're dealing with –pression or compression.

Frustrated with a Stuck Screw? Here's How to Remove It!
Frustrated with a Stuck Screw? Here's How to Remove It!
Remove a broken screw making two holes
Remove a broken screw making two holes

Removing the Broken Bleeder Screw

Now that you've located the broken bleeder screw, it's time to remove it. The process may vary slightly depending on the type of screw, so we'll discuss both methods.

Removing a Broken Pressurized Bleeder Screw

Pressurized bleeder screws have a one-way valve that allows fluid to exit but not enter. To remove a broken pressurized bleeder screw, follow these steps:

AD
  1. Position the C-clamp or brake bleeder tool over the brake line above the bleeder screw.
  2. Tighten the C-clamp or attach the bleeder tool to create a tight seal around the brake line.
  3. Using an adjustable wrench or channel-lock pliers, carefully turn the bleeder screw counterclockwise to unscrew it. If the screw is too damaged, you may need to use a tool designed for removing broken bleeder screws.
  4. Once the bleeder screw is loose, slowly release the pressure on the C-clamp or bleeder tool.
  5. Use a clear hydraulic fluid to flush the brake line, ensuring no debris from the broken bleeder screw enters the brake system.

Removing a Broken Compression-type Bleeder Screw

Compression-type bleeder screws work by compressing a rubber seal inside the body of the screw to release pressure. To remove a broken compression-type bleeder screw, follow these steps:

  1. Position the C-clamp or brake bleeder tool below the bleeder screw on the brake line.
  2. Tighten the C-clamp or attach the bleeder tool to create a tight seal around the brake line.
  3. Use an adjustable wrench or channel-lock pliers to carefully unscrew the bleeder screw counterclockwise.
  4. Slowly release the pressure on the C-clamp or bleeder tool.
  5. Use a clear hydraulic fluid to flush the brake line, and remember to keep the brake master cylinder topped off with fresh brake fluid during the flushing process.

After removing the broken bleeder screw, it's essential to bleed your brakes to remove any air bubbles that may have entered the system during the process. If you're unsure about any part of this process, consult a professional mechanic or consult your vehicle's repair manual for more specific guidance.

The final step is to reinstall the new bleeder screw, ensuring it's properly tightened and properly sealed to prevent any leaks. Once you've completed this task, carefully lower your vehicle from the jack stands, and test your brakes gently at slow speeds before driving normally. By following this guide, you should now be able to remove a broken bleeder screw and restore your brakes to working order.

AD
AD