how to remove a 3 piece crank

Mastering Crank Removal: Step-by-Step Guide to Remove 3-Piece C наме.linear

By Emily Johnson
AD

If you're a cycling enthusiast or a professional mechanic, you might find yourself in a situation where you need to remove a 3-piece crank. Whether it's for maintenance, repair, or upgrade, knowing how to remove a 3-piece crank can save you time and money. So, let's dive into a step-by-step guide on how to do this with ease and precision.

Before we begin, ensure you have the necessary tools at hand. You'll need a or a 8mm hex key, a crank puller tool, a hammer, and lubricant. Safety glasses are also a must to protect your eyes from any potential debris. Now, let's get started.

Preparation and Initial Disassembly

First, make sure the bike is secure and won't move around during the process. You can achieve this by flipping the bike over so the handlebars are resting on the ground. This also makes it easier to access the crank arms.

AD
Crank Removal and Installation - Three Piece Crankset (Square Spindle, ISIS, Octalink)
Crank Removal and Installation - Three Piece Crankset (Square Spindle, ISIS, Octalink)
Crank Removal and Installation - Two Piece Compression Slotted (Hollowtech II, FSA)
Crank Removal and Installation - Two Piece Compression Slotted (Hollowtech II, FSA)
How-To: Install Truvativ Descendant Cranks - Mountain Bike Action Magazine
How-To: Install Truvativ Descendant Cranks - Mountain Bike Action Magazine

Before removing the crank, you need to disconnect the derailleur cables and any other components that might interfere with the process.

Unfastening the Lockring

The lockring keeps the crankset firmly in place. To remove it, use an 8mm hex key or an adjustable wrench, depending on its design. The left side is typically studded and has external splines for fine adjustment. Hold the crankarms steady with one hand while turning the lockring counterclockwise with the other.

How to fix a broken window crank (casement operator)
How to fix a broken window crank (casement operator)
Shaft Repair Method: How to Rebuild an Oversized Keyway - Belzona Blog
Shaft Repair Method: How to Rebuild an Oversized Keyway - Belzona Blog

If it's too tight, you can use a Crank Arm Extraction Tool or a crank puller to make it easier. Once loosened, unscrew it by hand until it's completely off.

Removing the Crankarms

Now that the lockring is off, remove the crankarms using a crank puller tool or a Crank Arm Extraction Tool. If you're using a crank puller tool, first install it over the crank arm, then tap it gently with a hammer to drive its pins into the crank arm's splines. Turn the crank puller tool counterclockwise until the crankarm comes off.

AD

If the crankarm is stubborn and won't budge, apply some lubricant between the splines to help it slide out more easily. Be careful not to damage the crankarm or the bottom bracket during this process.

Detaching the Spindle

With the crankarms removed, you can now see the bottom bracket spindle. Before extracting it, mark the spindle's position in relation to the bottom bracket shell. This will help you reinstall it correctly later on.

To remove the spindle, you may need to drive it out using a long, sturdy rod or a dedicated tool. If the spindle is stuck, you might need to use a block of wood and a mallet or apress to gently tap it out. Be cautious not to damage the bottom bracket shell or the spindle itself.

AD

Clearing the Bottom Bracket Shell

Now that the spindle is out, clean the bottom bracket shell thoroughly. Use a degreaser to remove any old grease or grime, then dry it completely with a clean cloth. This prepares the shell for the new crankset or rebuild.

Inspect the bottom bracket shell for any signs of wear or damage. If necessary, replace it before installing a new crankset to ensure a secure and long-lasting fit.

Lubrication and Reassembly

Before installing the new crankset, make sure to lubricate the bottom bracket shell and the spindle. Use the appropriate grease for your bottom bracket type to ensure a smooth rotation and rust prevention.

AD

Reinstall the spindle, crankarms, and lockring in reverse order, ensuring everything is properly aligned and tightened. Remember to torque the lockring to the manufacturer's specified setting to prevent it from coming loose during riding.

There you have it! You've successfully removed a 3-piece crank and are ready to install a new one or rebuild your old one. Don't forget to test the cranks after reassembly to ensure they spin smoothly and don't wobble. Happy wrenching!

AD