how to remove 1911 sights

Step-by-Step: How to Remove Sights on 1911 Pistols

By Ashley Martin
AD

If you're a firearms enthusiast or shooter looking to change the sight picture on your 1911 pistol, one of the first steps is knowing how to remove 1911 sights for replacement. While this may seem daunting at first, with the right tools and guidance, it's a straightforward process that requires a steady hand and patience. Let's dive into the step-by-step process, along with some tips to ensure a smooth and safe procedure.

Before we get started, ensure your 1911 is unloaded and there are no funds in the chamber or magazine. Safety should always be your top priority when handling firearms. Additionally, gather your tools: an armorer's wrench, a 1911 sight-mounting tool, a hammer, a punch, a roll pin starter, and a punch drift.

Understanding 1911 Sights and Their Types

Before removing sights, it's crucial to understand the different types of sights used on 1911 pistols. The most common are:

AD
How to Clean a Semi-Automatic Pistol - DIY Prepper
How to Clean a Semi-Automatic Pistol - DIY Prepper
Defensive 1911: Cleaning & Maintenance — Swift | Silent | Deadly
Defensive 1911: Cleaning & Maintenance — Swift | Silent | Deadly
How to Clean a Semi-Automatic Pistol - DIY Prepper
How to Clean a Semi-Automatic Pistol - DIY Prepper
  1. Military-style Sights: These are standard on most 1911 models and come in various shapes, sizes, and materials — from rudimentary notch and post to more advanced designs like fiber optic or Tritium.
  2. Target Sights: These high-visibility sights are typically larger and more robust, helping shooters achieve better accuracy at longer ranges. Examples include Novak and XS Sights.

Knowing the type of sights on your 1911 will help you determine the best tools and methods for removal.

Preparation and Safety Checks

First, ensure your 1911 is completely unloaded and that no ammunition is present. Double-check by opening the slide, locking it back, and visually inspecting the chamber.

How to Clean a Semi-Automatic Pistol - DIY Prepper
How to Clean a Semi-Automatic Pistol - DIY Prepper
How to Aim Iron Sights [Complete Guide with Photos & Tips]
How to Aim Iron Sights [Complete Guide with Photos & Tips]

Next, use your armorer's wrench to remove the grip screws and remove the grip panels. This step is essential as it provides better access to the sights and allows you to work more comfortably.

Removing the Front Sight

The front sight on a 1911 is usually secured by a roll pin. To remove it, follow these steps:

AD
  1. Use your roll pin starter and a hammer to carefully drive the roll pin out from the top or bottom, depending on the design. Do not strike the pin directly; instead, use the starter tool to protect the pin and prevent it from becoming damaged.
  2. Once the roll pin is driven out, use a punch and hammer to tap the front sight out of its recess. Be gentle and patient to avoid damaging the pistol's slide.

If your front sight is held in place by a set screw instead of a roll pin, use an appropriately sized Allen wrench to remove it.

Removing the Rear Sight

The rear sight on a 1911 is held in place by a retention screw. To remove it:

  1. Use your 1911 sight-mounting tool or an appropriately sized screwdriver to carefully loosen and remove the retention screw.
  2. Once the screw is removed, use the same tool to gently pry the rear sight out of its recess. Again, be patient and gentle to avoid damaging the slide.

If your rear sight is dovetailed, you may need to use a sight-pushing tool or a punch and hammer to carefully Tap the sight out of its recess.

AD

Installing New Sights

Now that your old sights are removed, it's time to install the new ones. The process is essentially the reverse of the removal process:

Installing the Front Sight

If your new front sight uses a roll pin:

  1. Position the front sight in its recess. Align it carefully to ensure the sight picture is consistent with your expectations.
  2. Insert the roll pin and use your roll pin starter and hammer to tap it gently and evenly into place. Do not strike the pin directly; use the starter tool to protect it.

If your new front sight uses a set screw:

AD
  1. Position the front sight in its recess.
  2. Insert the appropriately sized Allen wrench and tighten the set screw until it's securely in place.

Installing the Rear Sight

With the rear sight:

  1. Position the rear sight in its recess. Ensure it's properly aligned and centered.
  2. Using your 1911 sight-mounting tool or an appropriately sized screwdriver, reinsert and tighten the retention screw. Be careful not to overtighten and strip the screw.

The final step is to reattach the grip panels and test-fire your 1911 to ensure the new sights are properly aligned and function as expected. Always follow safe gun handling practices, and remember that changing sights can cause the pistol to zero in slightly differently, so expect to make minor adjustments.

Changing sights on your 1911 pistol offers an opportunity to personalize your firearm and improve its functionality based on your specific needs and shooting preferences. With a bit of patience and practice, this procedure becomes a straightforward task that enhances your understanding and appreciation of your 1911. Safe shooting and happy sight customization!

AD