how to regen a peterbilt

Mastering Peterbilt Regenerative Braking: A Step-by-Step Guide

By Sarah Wilson
AD

If you're a fleet manager or a passionate truck enthusiast, you might wonder, "How do I regen my Peterbilt?" Regen, short for regeneration, is a crucial process that helps maintain the efficiency and lifespan of your truck's Selective Catalytic Reduction (SCR) system. In this guide, we'll delve into the world of diesel exhaust aftertreatment and provide you with a step-by-step guide to regenerate your Peterbilt's SCR system.

REGENERATION, PUT SIMPLY, is the process of converting harmful nitrogen oxides (NOx) from your truck's exhaust into harmless nitrogen gas and water. This is achieved by injecting Diesel Exhaust Fluid (DEF), a solution of urea and deionized water, into the exhaust stream. However, over time, the SCR catalyst can become clogged with ash and other residuals. A periodic, controlled regeneration process helps to clear this buildup and keep your truck running smoothly.

Understanding Your Peterbilt's Regen Process

Peterbilt trucks are designed to regenerate their SCR systems automatically under specific driving conditions. However, manual intervention may be required in certain situations. Here's a breakdown of the two types of regeneration:

AD
Custom made Peterbilt semi truck with Louis Vuitton interior.
Custom made Peterbilt semi truck with Louis Vuitton interior.
there is a motorcycle that is sitting in the bed of this truck and it's chrome
there is a motorcycle that is sitting in the bed of this truck and it's chrome
the inside of a blue van with instructions on how to load and unload it
the inside of a blue van with instructions on how to load and unload it

Passive (Automatic) Regeneration

In most cases, your Peterbilt will regenerate its SCR system automatically. The process occurs when the truck's engine control module (ECM) detects high NOx levels or when the SCR system is nearly full. The ECM will initiate a passive regen by reducing engine power, which in turn raises the exhaust temperature. This increase in temperature promotes the conversion of NOx and burning off of residuals, effectively cleaning the SCR catalyst.

As a fleet manager or driver, you may notice a slight decrease in engine power during a passive regen. This is normal and shouldn't cause concern. Passive regenerations usually take around 15 to 30 minutes and can occur during operation, provided the truck is not in a critical driving situation.

the truck generations are shown in orange and black, as well as their engine options
the truck generations are shown in orange and black, as well as their engine options

Active (Manual) Regeneration

Under certain conditions, a passive regen may not be possible or efficient. In these cases, an active, or manual, regeneration might be required. Active regenerations should be performed by a certified technician at a reputable truck service center. They have the necessary tools and expertise to ensure the process is done correctly, minimizing the risk of damage to your truck's SCR system.

One of the main reasons for an active regen is to remove ash accumulation in the catalyst. Unlike soot, ash cannot be burned off during a passive regen. To remove ash, the exhaust temperature must be raised to extremely high levels, which is only safe and possible under controlled conditions at a service center.

AD

When to Consider an Active Regen

The need for an active regen can often be determined through regular monitoring of your Peterbilt's SCR system. Many modern trucks come equipped with dedicated diagnostic tools or gauge cluster displays that provide information about the SCR system's health. Common signs you might need an active regen include:

  • Warning lights or messages on the instrument cluster - Ignoring these warnings could lead to Diagnostic Trouble Codes (DTCs) and potential SCR system failure.
  • Decreased fuel economy - A clogged SCR catalyst can lead to increased fuel consumption as the engine works harder to provide the same amount of power.
  • High exhaust temperatures - Although a normal passive regen may cause a temporary increase in exhaust temperatures, persistently high temperatures could indicate a need for an active regen.

Performing an Active Regeneration (Tech-Only)

As mentioned earlier, active regenerations should be performed by a certified technician due to the high temperatures involved. Here's a simplified overview of the process to give you an idea of what's involved:

  1. The technician will first shut off the truck and allow the exhaust to cool down.
  2. Next, they'll disconnect the SCR system's oxygen sensors and exhaust gas temperature sensors.
  3. The technician will then connect diagnostic tools to the truck's ECM, which will allow them to initiate the active regen process.
  4. Using these tools, they'll monitor the temperature of the SCR catalyst, gradually increasing it to around 1,200°F - 1,300°F (650°C - 700°C).
  5. Once the desired temperature is reached and maintained for a sufficient duration, the technician will allow the system to cool down naturally.
  6. Finally, they'll reconnect the sensors and perform a thorough inspection of the SCR system to ensure it's functioning correctly.
AD