how to refill a gojo soap dispenser

How to Refill Gojo Soap Dispenser

By Amanda Davis
AD

/refilling your Gojo soap dispenser is a quick and simple task that ensures you always have clean, fresh soap at your fingertips. By following these steps, you can maintain your dispenser hygienically, reducing the risk of bacterial buildup and ensuring an optimal soap experience.

First things first, let's gather your materials. You'll need your Gojo soap dispenser, a refill bottle, and perhaps a clean cloth or paper towel for any spills. Now, let's dive right into the process!

Preparing Your Dispenser for Refill

The first step is to ensure your dispenser is empty and clean. This will prevent any residue from affecting the performance of your new soap.

AD
How To Open A Gojo Soap Dispenser - Hunker
How To Open A Gojo Soap Dispenser - Hunker
How to Stop Refilling the Soap Dispenser
How to Stop Refilling the Soap Dispenser
How To Change Soap In Gojo Soap Dispenser – Storables
How To Change Soap In Gojo Soap Dispenser – Storables

Before you begin, make sure your hands are clean to avoid contamination. Then, proceed to turn the pump head counterclockwise to remove it from the reservoir. Set it aside, taking care not to lose the retaining ring that holds it in place.

Emptying the Reservoir

The reservoir might still contain some soap. To empty it, simply tilt the dispenser upside down over a sink or vessel to allow the remaining soap to drain out. You can use a clean cloth or paper towel to wipe the reservoir clean afterward, ensuring no residue is left behind.

Save Money and learn how to refill a foam soap dispenser!
Save Money and learn how to refill a foam soap dispenser!
How to Refill A Foaming Soap Container
How to Refill A Foaming Soap Container

If there's any stubborn soap remaining, you can use a little warm water and gentle scrubbing to help remove it. Again, make sure to wipe the reservoir dry before moving on to the next step.

Cleaning the Pump Head

With the reservoir empty and clean, it's time to clean the pump head. First, carefully remove the retaining ring by pressing the small indentation on the side of the pump head and pulling the ring off.

AD

Then, pull off the pump head itself and set it aside. Now, you can use a small brush or cotton swab with some rubbing alcohol or warm, soapy water to clean the exterior and interior of the pump head, including the dispensing nozzle. Make sure it's clean and dry before reassembly.

Refilling Your Gojo Soap Dispenser

Now that your dispenser is cleaned and ready, it's time to refill it with your new soap. Start by pouring the refill soap into the reservoir until it reaches the fill line indicated on the side of the dispenser.

Remember to use Gojo's soap specifically designed for your dispenser model to ensure optimal performance and prevent clogging or malfunctioning.

AD

Reassembling the Dispenser

Once the reservoir is filled, it's time to reassemble the dispenser. Start by re-inserting the cleaned and dried pump head into the reservoir. Make sure it's securely in place and faces the correct direction for dispensing.

Next, replace the retaining ring by aligning the small indentation on the side of the pump head with the slot on the reservoir, then press the ring into place. Finally, turn the pump head clockwise to secure it. Now, your Gojo soap dispenser is ready to use!

Testing the Dispenser

After refilling and reassembling, it's always a good idea to test your dispenser to ensure it's working correctly. Give the pump head a few squeezes, and check that soap is dispensed smoothly and evenly.

AD

If everything works as expected, you're all set! Your Gojo soap dispenser is ready to dispense clean, fresh soap for you and your guests to use.

Regularly refilling and maintaining your soap dispenser ensures a clean and hygienic environment. By following these steps, you can help prevent the spread of germs and keep your soap dispenser working perfectly. Next time you notice your dispenser running low, don't wait – refill it promptly to keep your hands clean and healthy!

AD