how to recoil spring on a pull start

Mastering Pull Start: Step-by-Step Guide to Recoil Spring

By Sarah Jackson
AD

If you're a proud owner of a pull-start engine, you know the importance of maintaining its recoil spring. This sturdy, spiral-shaped piece of machinery is responsible for giving your engine a smooth, powerful start. But over time, it can wear out, or sometimes, snap due to excess tension. So, if you're wondering how to recoil spring on a pull start, you've come to the right place.

In this comprehensive guide, we'll walk you through the process step-by-step, ensuring you'll have your engine back to its reliable, trouble-free self in no time. Let's dive in!

Understanding the Recoil Spring

The recoil spring is the heart of a pull-start mechanism. It's annéed around the drum, which the start rope winds around. When you pull the rope, the spring stores energy, and when you release the handle, the stored energy unwinds the rope and cocks the engine for ignition.

AD
RicksDIY How To Rewind Recoil Pull Starter Spring Small Engine Coil Start
RicksDIY How To Rewind Recoil Pull Starter Spring Small Engine Coil Start
How to fix a pull starter recoil spring and replace a stuck or limp pull cord
How to fix a pull starter recoil spring and replace a stuck or limp pull cord
Easily Fix Your Pull Start Recoil Spring for Small Engine
Easily Fix Your Pull Start Recoil Spring for Small Engine

Understanding its function and how it interacts with other parts is crucial for making any repairs or replacements. Now, let's move on to the types of recoil springs.

Types of Recoil Springs

There are two main types of recoil springs: return springs and power springs. Return springs are used to return the start handle to its original position after pulling the rope. On the other hand, power springs store energy to power the engine's ignition system.

An easy way to fix a pull start recoil spring .
An easy way to fix a pull start recoil spring .
how to rewind a recoil starter spring
how to rewind a recoil starter spring

Power springs are further divided into two types: fixed and adjustable. Fixed springs have a set tension level, while adjustable ones allow you to customize the tension for different engine sizes or conditions. In this guide, we'll focus on replacing power springs, as they're more prone to wear and tear.

Identifying a Worn-out Recoil Spring

Before we dive into how to recoil spring on a pull start, it's essential to determine if your engine's spring needs replacing. There are a few tell-tale signs to look out for:

AD
  • Difficulty pulling the start rope
  • Engine not starting with a full pull of the rope
  • Visibly worn or broken strands in the spring

If you notice any of these signs, it might be time to replace your recoil spring.

Safety First: Pre-Replacement Checks

Before you Begin, ensure your engine is completely cool to prevent any burns. Also, disconnect the spark plug wire to prevent any accidental sparking during the replacement process.

Next, mark the current position of the rope on the drum with a pencil. This will help you reinstall the rope in the same position, ensuring it doesn't over-wind or under-wind, causing potential issues.

AD

Removing the Worn-out Spring

Loosen the mounting screw on the spring to release the tension. Be careful not to let the spring fully unwind, as it can cause injury. Secure the spring with a screwdriver or a special tool designed for this purpose.

Once the tension is released, remove the old spring by prizing it off the drum with a flathead screwdriver or a specialized puller tool. If you're having trouble, you can soak the spring in penetrating oil to help loosen it up.

Installing the New Recoil Spring

Before installing the new spring, ensure it's the correct type for your engine. The spring's size, wire diameter, and number of coils should match the original as closely as possible.

AD

Start by positioning the new spring around the drum, aligning it with the mark you made earlier. Slowly begin to wind the spring onto the drum, using a pair of pliers to hold the start rope in place.

Adjusting the Spring Tension

If you're using an adjustable spring, you'll need to set the tension correctly. Too little tension can prevent the engine from starting, while too much can cause excessive wear and tear, or even break the spring.

Most engines have a suggested tension range printed in their user manual. If you can't find this information, start with a medium tension and adjust based on your engine's performance. You can use a springpuller tool to tension the spring to the desired level.

Reinstalling the Rope and Final Checks

Once you've achieved the correct tension, reinstall the start rope onto the drum, ensuring it aligns with the mark you made earlier. Secure the mounting screw, reattach the spark plug wire, and give your engine a test pull.

If everything is working correctly, your engine should start smoothly with a full pull of the rope. If not, double-check that the spring is correctly installed and the rope is forming the correct loop around the drum.

Congratulations! You've successfully learned how to recoil spring on a pull start. With regular maintenance, your engine should provide reliable service for many years to come. If you still have questions or need further guidance, don't hesitate to consult a professional mechanic or your engine's user manual.

AD