how to reattach dishwasher spray arm

How to Reattach a Dishwasher Spray Arm: Step-by-Step Guide

By John Rodriguez
AD

Have you found that your dishwasher isn't cleaning as well as it used to? It could be a sign that the spray arm isn't spinning properly. Don't worry, reattaching it is a simple task you can do yourself. Let's go through a step-by-step guide to help you get your dishwasher back in working order.

Before you begin, ensure you have a small flathead screwdriver, and if your dishwasher is a older model, you might also need a pair of pliers. Now, let's dive into the process.

Preparation: Accessing the Spray Arm

To access the spray arm, you'll first need to remove the bottom rack from your dishwasher. For most models, you can do this by lifting it up and tilting it out. Once the rack is out, you should see the spray arm at the bottom of the machine.

AD
How to Replace a Spray Arm on a Kenmore Dishwasher | Homesteady
How to Replace a Spray Arm on a Kenmore Dishwasher | Homesteady
Reattach Samsung Dishwasher Top Rack Spray Arm
Reattach Samsung Dishwasher Top Rack Spray Arm
How to replace a dishwasher lower spray arm
How to replace a dishwasher lower spray arm

Some dishwashers have a protective cover over the spray arm. If yours does, you'll need to remove this first. It's usually held in place by a few screws, which you can unscrew using your flathead screwdriver.

Disconnecting the Spray Arm

Now that you can see the spray arm, you'll need to disconnect it from the water inlet. This is where a pair of pliers might come in handy, as the connection can be quite tight. Be careful not to bend or damage the delicate plastic bits.

How to Clean Dishwasher Arms Fast
How to Clean Dishwasher Arms Fast
How to Remove the Bottom Spray Arm on a Dishwasher
How to Remove the Bottom Spray Arm on a Dishwasher

Once disconnected, you should be able to pull the spray arm out. If it's stuck, try squirting some WD-40 or a similar lubricant into the hole where the arm connects to the water inlet. Let it soak for a few minutes, then try again.

Inspecting the Spray Arm

With the spray arm removed, take a close look at it. There may be food particles or debris blocking the holes, preventing water from spraying properly. If this is the case, you can clean these out using a small brush or pipe cleaner.

AD

If the spray arm appears damaged or worn out, it might be time to replace it. Modern dishwashers use a variety of spray arm types, so you'll need to ensure you get the correct one for your model. Check your dishwasher's user manual or look up the model number online to find the right part.

Reattaching the Spray Arm

If the spray arm wasn't damaged and is just dirty, simply clean it off and reattach it. If you've had to replace it, make sure you have the new one before proceeding.

Reattaching the spray arm involves doing the reverse of the disconnection process. Line up the holes on the arm with the water inlet, then push the arm back onto the inlet. As you do this, you should hear a clicking sound as the arm locks back into place. If you don't hear this, or the arm feels loose, it might not be properly attached.

AD

Securing the Spray Arm

Once the spray arm is reattached, you'll need to secure it in place. If your dishwasher has a protective cover, put this back on and replace the screws you removed earlier.

Now, put the bottom rack back into your dishwasher. Test the machine by running a cycle to ensure the spray arm is spinning freely. If it is, your dishwasher should now be working as good as new.

Regularly cleaning your dishwasher's spray arm can help prevent clogs and ensure it always works effectively. A simple check during your weekly clean can save you a lot of hassle down the line. Happy washing!

AD
AD