how to raise a toilet flange for tile

Boost Your Bathroom Project: How to Raise a Toilet Flange for Tile

By Jessica Taylor
AD

When it comes to updating your bathroom with new tile flooring, there's a crucial aspect often overlooked - the toilet flange. To ensure a seamless, professional look and watertight seal, raising a toilet flange for tile can be necessary. But don't let the prospect of this task intimidate you. With the right know-how, it's a achievable DIY project.

Raising a toilet flange involves increasing its height to match the finished floor level, ensuring a perfect alignment with your new tiles. This guide will walk you through the process, from gathering tools to completing the job, ensuring a watertight,Professional-looking finish.

Preparation: Tools and Materials

Before you begin, assemble your tools and materials. You'll need:

AD
Why You Should Install A Toilet Flange On Top Of A Tile
Why You Should Install A Toilet Flange On Top Of A Tile
the hole in the floor that has been opened to show how to extend a toilet flange on a tile floor
the hole in the floor that has been opened to show how to extend a toilet flange on a tile floor
Toilet Repair Ring Flange: Fix Leaks, Reset Your Toilet, and Stop a Running Toilet
Toilet Repair Ring Flange: Fix Leaks, Reset Your Toilet, and Stop a Running Toilet
  • Circular saw with a ceramic tile cutting blade or a wet saw
  • Tape measure
  • Pencil
  • Screwdriver or drill and screwdriver bit
  • Adjustable wrench
  • Shims or additional wax rings (depending on the method used)
  • New wax ring

Measure Accurately

First, determine the height increase needed for your flange. Measure from the finished floor to the existing flange. Subtract the height of your current wax ring. The result is the height your new wax ring and shims (or additional wax rings) need to be.

Disassemble and Remove the Old Flange

Turn off the water supply and flush the toilet to empty the tank. Disconnect the water supply line and unscrew the bolts attaching the toilet to the floor. Carefully lift and remove the toilet. Remove the old flange, taking note of its position and size.

How to Rough in a Toilet Flange
How to Rough in a Toilet Flange
How to Raise a Toilet Flange for New Floor Height
How to Raise a Toilet Flange for New Floor Height

Raising the Flange: Two Common Methods

Once your old flange is out, you can choose one of two methods to raise the new flange. Both methods involve creating a new, taller ring to support your toilet.

Method One: Using Shims

Create 'shims' out of plywood or vinyl that match the diameter of your new wax ring. The total thickness of your shims should equal the height increase you calculated earlier. Insert the shims into the flange hole, spreading them evenly to create a stable base.

AD

Method Two: Stacking Wax Rings

Alternatively, you can stack additional wax rings on top of your new one to reach the desired height. This method is simpler but can become unsightly if too many rings are used. It's best employed when only a small height increase is needed.

Install the New Flange and Wax Ring

Once yournew ring and support are in place, insert the new wax ring. Ensure it's well-aligned with the toilet drain. Replace the toilet, checking that it aligns properly with the bolts. Hand-tighten the bolts. Use an adjustable wrench for final tightening.

Test the Seal

Before reinstalling the water supply line, test the seal around the wax ring by pouring water into the toilet drain. If there are no leaks, reinstall the water supply line and turn the water back on.

AD

Tile In and Enjoy

With your raised flange properly installed, you're ready to tile over the area, knowing your finished floor will align perfectly with your toilet.

Raising a toilet flange for tile might seem daunting, but with careful measurement and these step-by-step instructions, you're equipped to handle the job. The reward? A newly tiled bathroom that looks professionally finished. So go ahead, tackle that DIY project, and enjoy your newly renovated space.

AD