how to put viper alarm in valet mode

How to Engage Viper Alarm Valet Mode

By Brian Martinez
AD

Placing your Viper alarm in valet mode is a crucial step when you hand over your keys to a parking attendant. This mode disables the alarm's sensor that triggers the trunk lock, allowing the valet to open the trunk without setting off the alarm. Here's a step-by-step guide on how to do this, ensuring the safety of your car and its contents.

Before we dive into the process, it's essential to remember that Viper alarms have several modes, including car finder, panic, and trunk alert. Valet mode is specific to deactivating the trunk alarm. Let's proceed to learn how to enable this mode on your Viper alarm.

Understanding Your Viper Alarm's Keypad

The first step is to identify the keypad on your Viper alarm. This is usually located on the driver's side of your car, near the door handle. The keypad consists of numbers and a few special buttons, including Lock, Unlock, and Valet.

AD
How To program DEI Viper Python Avital Sidewinder Valet Hornet Alarm Remote Transmitter Fobs
How To program DEI Viper Python Avital Sidewinder Valet Hornet Alarm Remote Transmitter Fobs
How to Disable Viper Alarm Without Remote | 10 Easy Steps (2026)
How to Disable Viper Alarm Without Remote | 10 Easy Steps (2026)
Viper Car Alarm Systems Review
Viper Car Alarm Systems Review

Familiarize yourself with these buttons, as you'll be using them to enter your unique passcode and enable the valet mode.

Locating and Entering Your Passcode

Your Viper alarm comes with a unique passcode that you set during the initial installation. This passcode is used to access specific features of your alarm system, including valet mode. To locate the passcode, check your alarm's user manual or contact the installation service if you've forgotten it.

Viper 5704Z Remote Start System | Crutchfield Video
Viper 5704Z Remote Start System | Crutchfield Video
Car Alarm Installation w/ Remote Start | Dodge Charger SRT8 & Viper 5904 LCD Remote
Car Alarm Installation w/ Remote Start | Dodge Charger SRT8 & Viper 5904 LCD Remote

Once you have your passcode, enter it using the keypad on your car. The passcode should be four digits long, and the alarm should confirm that it has been entered correctly. If the passcode is accepted, you're ready to proceed to the next step.

Enabling Valet Mode

With your passcode entered, press and hold the Valet button on the keypad. You should wait for about 15-20 seconds while the alarm system processes your request. If everything is configured correctly, you should see the trunk lock light flashing on your car's interior. This indicates that the trunk is now capable of being opened without triggering the alarm.

AD

It's essential to note that most Viper alarms set the valet mode to last for a specified duration. This duration can range from one to four hours, depending on the specific model of your alarm. Once the time has elapsed, the valet mode will automatically deactivate, and the trunk alarm will be re-enabled. If you need your car back before the mode expires, you can exit the valet mode by repeating the same process you used to enter it.

Additional Precautions When Using Valet Mode

While valet mode is handy, it's crucial to exercise caution when using it. Never leave your car unattended with the valet mode enabled, as this could potentially allow unauthorized access to your vehicle.

Additionally, make sure to confirm with the parking attendant that they are aware of your car's alarm system and how to disable it when necessary. A simple, "Please don't open the trunk while in valet mode" should suffice. This not only ensures the safety of your car but also helps to avoid any potential confusion or misunderstandings.

AD

Confirming Valet Mode Deactivation

Before driving off, always double-check that the valet mode has been deactivated. The trunk lock light should no longer be flashing, indicating that the trunk alarm is back to its normal, active state. If the light continues to flash, it's possible that the valet mode was not exited correctly, and you should repeat the process to ensure your car is secure.

Regularly testing your alarm system, including the valet mode, is an excellent habit to get into. This ensures that you're familiar with the process and that your alarm system remains in top working condition.

In summary, placing your Viper alarm in valet mode is a straightforward process, involving entering your passcode and pressing the Valet button. Always remember to confirm that the mode has been enabled and deactivated correctly, and to exercise caution when using it. This way, you can ensure the safety of your car, its contents, and your peace of mind.

AD
AD