how to put the belt back on a dryer

How to Secure Your Dryer Belt: A Step-by-Step Guide

By John Jackson
AD

Nothing can be more frustrating than realizing your dryer's belt has snapped while it's mid-cycle. However, putting it back on isn't rocket science. With a bit of know-how and the right tools, you can have your dryer running like new again in no time. Let's dive into the step-by-step process of how to put the belt back on your dryer.

Before we proceed, ensure you unplug your dryer from the power source. Safety first, right? Also, gather your tools - a new dryer belt (matching your dryer's model for a perfect fit), a 1/4" nut driver, and a 5/16" open-end wrench. Now, let's get started!

Step-by-step Process

This section will guide you through the entire process, breaking down the task into manageable steps. From accessing the belt pathway to securing the new belt, we've got you covered.

AD
How to Replace Dryer Belt on Any Front Load Clothes Dryer
How to Replace Dryer Belt on Any Front Load Clothes Dryer
Looking to EASILY Change Your LG Tumble Dryer Belt Yourself?
Looking to EASILY Change Your LG Tumble Dryer Belt Yourself?
How to Replace a Dryer Belt on Whirlpool Models
How to Replace a Dryer Belt on Whirlpool Models

But first, a quick tip. Always ensure your dryer is cold before starting. This will prevent burns and make the process much easier.

Accessing the Belt Pathway

First, remove the dryer's back panel. This is usually secured by a few screws at the top. Use your nut driver to loosen and remove them. Then, carefully lay the panel aside. You should now see the belt's pathway and the motor pulley.

How To Change A Dryer Belt – Storables
How To Change A Dryer Belt – Storables
The Hidden Signs Your Washing Machine Belt Needs Replacing
The Hidden Signs Your Washing Machine Belt Needs Replacing

Next, locate the idler pulley at the other end of the belt pathway. This pulley is held in place by a spring. Use your wrench to loosen and remove the pulley nut. This will make the idler pulley movable, giving you access to the belt's pathway.

Removing the Old Belt

Take a look at the motor and the idler pulley. You should see the old belt wrapped around them. Using your fingers, carefully pull the old belt off the motor's pulley and the idler pulley. This should be relatively easy, as the belt has likely broken due to wear and tear.

AD

If the belt is stuck, you can gently use a flathead screwdriver to pry it loose. Be careful not to scratch the pulleys or the drum while doing this.

Installing the New Belt

Now that the old belt is out of the way, it's time to put the new one in place. The installation process is essentially the reverse of the removal process. Let's break it down into manageable steps.

But before we start, ensure your new belt matches your dryer's model. The belt's length, width, and the distance between its notches should all match the specifications of your dryer. If you're unsure, consult your dryer's user manual or contact a professional.

AD

Routing the New Belt

Start by placing the new belt around the motor pulley. The wider end of the belt (with the notches) should face you. This ensures that the belt is properly aligned with the idler pulley.

Next, route the belt over the idler pulley. The notches on the belt should fit perfectly over the Allen head bolts on the idler pulley. If they don't, gently adjust the belt until they do. This is crucial for the belt to stay in place during operation.

Securing the New Belt

Now, carefully pull the belt taut until the notches on the other end align with the slots on the idler pulley. Make sure the belt is taut but not too tight. A good way to check this is to see if you can fit one or two fingers between the belt and the frame of the dryer.

AD

Once the belt is taut, replace the idler pulley nut and tighten it using your wrench. Be careful not to overtighten, as this can cause the belt to stretch or snap prematurely.

Final Checks and Reassembly

Now, it's time to ensure everything is in working order before reassembling your dryer.

Safety Check: Before plugging your dryer back in, do a quick visual inspection of the belt to ensure it's secure and properly aligned. Also, make sure the dryer's manual safety thermostat is functioning correctly. This is a crucial safety feature that shuts off the dryer overheating.

Only when you're satisfied that everything is in order, should you replace the back panel. Secure it with the screws you removed earlier. Then, plug your dryer back in and give it a test run.

And there you have it! You've successfully installed a new belt on your dryer. Using this guide, you've likely saved yourself a hefty repair bill. But remember, preventive maintenance is key. Regularly inspect your dryer's belt for signs of wear and tear to avoid unexpected breakdowns in the future.

Next time you're in the market for a new appliance, consider a dryer with a beltless design. These dryers often require less maintenance and are known for their durability.

Happy drying! And until next time, stay safe and keep your home running smoothly.

AD