how to put sink stopper back in

Reinstalling a Sink Stopper: How to Quickly Fix Your Kitchen or Bathroom Drain

By Rachel Martinez
AD

Ever found yourself in a predicament where your sink plug has gone awry, leaving you with a watery mess? Don't stress, it happens! Knowing how to put a sink stopper back in is a crucial part of DIY home maintenance. This guide will walk you through the process, ensuring your sink is functioning as it should in no time.

Before we dive in, remember that the process might slightly vary depending on your sink's model and the type of stopper it has - pop-up (lift and press), flipper (levers at the side), or AAV (artefact with a metal lever). This article will cover the most common types. Let's get you back on track!

Identifying the Type of Your Sink Stopper

Before you start, you need to understand the type of stopper your sink has. This will determine the approach you'll take to fix it.

AD
How to Adjust Bathroom Sink Stopper
How to Adjust Bathroom Sink Stopper
How to Remove a Sink Stopper (By Stopper Type)
How to Remove a Sink Stopper (By Stopper Type)
How to Remove a Bathroom Sink Stopper | Take Out Pop-Up Drain Stopper from Sink
How to Remove a Bathroom Sink Stopper | Take Out Pop-Up Drain Stopper from Sink

1. Pop-up Stopper: These are the most common and are typically found in kitchen sinks. They usually have a lift-and-press mechanism, with a pop-up lever at the side of the sink.

Reseating the Stopper Mechanisms

One common issue with pop-up stoppers is that the mechanisms under the sink can slip out of place. If this is the case, putting the sink stopper back in involves merely reseating these components.

How to Fix a Bathroom Sink Stopper
How to Fix a Bathroom Sink Stopper
Fix a Sink Stopper
Fix a Sink Stopper

First, turn off the water supply to avoid any mishaps. Then, locate the assembly under the sink and push the rod all the way up. This should allow the stopper to close. If the rod doesn't move, you might need to gently tap it with a hammer. Once it's in place, try lifting and pressing the lever to test if it's working.

Fixing Leaking Stopper Arms

Another issue with pop-up stoppers can be leaks. This often occurs when the rubber seals in the stopper arm wear down or become dislodged. Replacing these seals should fix the problem.

AD

To access the seals, disassemble the drain crossbar and linkage assembly using adjustable pliers. Once you've accessed the seals, simply replace them and reassemble the components. Make sure to test the stopper afterwards to ensure it's working as it should.

Dealing with Flipper-type Stopper Problems

Flipper stoppers are typically found in bathroom sinks and are operated by levers on the side of the sink. If these stoppers refuse to stay in the up position, the issue often lies with the rod that lifts the lever.

To fix this, follow similar steps to the pop-up stopper: turn off the water, locate the rod under the sink, and push it up. If it's not budging, try tapping it gently with a hammer. Once the rod is in place, flip the lever on the sink to test the mechanism.

AD

Replacing Worn-out O-rings

If your flipper stopper is leaking, it's likely that the O-rings in the lever assembly have become worn or damaged. Replacing these should solve the problem.

To do this, first disassemble the lever assembly using an appropriate tool (usually pliers or channel locks). Once you've accessed the O-rings, remove the old ones and replace them with new ones. It's crucial to get the right size to ensure a tight fit. After that, reassemble the components, test the lever, and you're good to go!

Working with AAV Stopper Issues

AV (Automatic Overflow) or AAV (Arrestor and Overflow) stoppers are found in sinks that have a second drain hole just below the faucet. If this type of stopper isn't working, it could be due to debris buildup.

AD

To fix this, you'll need to remove the strainer grid and clean out the part trapped debris. This can often be done with a wire brush or a small pick. Once everything is clean, reassemble the components and test the stopper.

Clearing Clogs and Blockages

Sometimes, the problem isn't with the stopper itself, but with a clog or blockage in the drain. If your sink is draining slowly or not at all, this might be the issue.

To clear a blockage, start by removing any debris from the drain using a drain cleaner or a plunger. Once the drain is clear, try running water to ensure that the drain is now working as it should. If not, you might need to use a drain snake to clear debris further down the pipe.

There you have it! With these steps, you should have your sink functioning as normal again. Regular maintenance can prevent these issues from occurring, so make sure to keep an eye on your sink and perform regular checks. Happy plumbing!

AD