how to put prius in neutral with dead battery

Revive Your Dead Prius: How to Put Your Hybrid in Neutral

By Joshua Jackson
AD

Imagine you're driving your Toyota Prius, known for its exceptional fuel efficiency, and suddenly you realize your battery is dead. It's a frustrating situation, but don't worry, there's a way to put your Prius in neutral even when the battery is drained. Here's a step-by-step guide to help you out of this pickle.

Before we dive into the process, let's quickly discuss why this might happen. Your Prius uses an electronic parking brake, and without sufficient battery power, it might not release. This is why you need to manually release it to put your car in neutral. Now, let's guide you through the process.

Understanding Your Prius' Systems

To begin, it's crucial to understand that your Prius uses an Electric Parking Brake (EPB) system. Unlike traditional parking brakes, the EPB is actuated electronically and doesn't require manual force. However, it does need a small amount of power from the battery to operate.

AD
Signs that your Prius Hybrid Battery is going bad - Updated list
Signs that your Prius Hybrid Battery is going bad - Updated list
Changing 12 volt battery in 2001 Prius
Changing 12 volt battery in 2001 Prius
How to Charge a Prius Battery
How to Charge a Prius Battery

Additionally, your Prius' transmission doesn't have a 'P' (Park) mode like conventional cars. Instead, it uses an 'Eco' mode that automatically engages when you put the shift lever in 'N' (Neutral). So, to put your Prius in 'Neutral', we'll need to manually release the parking brake and move the shift lever to 'N'.

Preparing Your Vehicle

Before you start, ensure your Prius is on a level surface and is safe to approach. The last thing you want is for your car to roll away while you're under the hood. If possible, use wheel chocks to prevent the car from rolling. Also, have a reliable power source ready, such as a portable power pack or jumper cables and another car.

Running an Inverter off a Prius for Backup Power |
Running an Inverter off a Prius for Backup Power |
1994-2000 Toyota RAV4 fuses and relays locations #toyota #rav4
1994-2000 Toyota RAV4 fuses and relays locations #toyota #rav4

Once your vehicle is secure, proceed to the next step.

Accessing the Fusible Link Box

The fusible link box in your Prius is where the battery's main power feed runs through. When the battery is dead, the EPB might latch on, preventing you from putting your car in neutral. By dismantling the box, you can disconnect the EPB's power and manually release the brake.

AD

Here's how to access the fusible link box:

  • Open your Prius' hood and locate the small, rectangular box near the left headlight. It's usually marked with a 'F.L.' insignia.
  • Using a flathead screwdriver, carefully pry open the cover. You might need to use some force, but be gentle to avoid breaking anything.
  • Inside, you'll see several fuses. The one we're interested in is usually the largest and is typically marked with 'EPB' or 'P/B' (Parking Brake).

With the box open, proceed to the next step.

Manually Releasing the EPB

Now that you've accessed the fusible link box, it's time to disconnect the power to the EPB.

AD

Here's how to do it:

  1. Using needle-nose pliers or a dedicated fuse puller, carefully remove the EPB fuse. Be careful not to touch the exposed electrical contacts inside the box.
  2. With the EPB fuse removed, the EPB should release automatically. If it doesn't, you can try to pull the parking brake lever up manually. It should release with a small amount of force.
  3. Once the EPB is released, put the shift lever in 'N' (Neutral). Your Prius should now be in neutral, regardless of the dead battery.

Remember, putting your Prius in neutral with a dead battery is a temporary fix. You'll still need to charge or jump-start your battery to start your car again. If you're using jumper cables, make sure to follow proper safety procedures to avoid injury.

Safety Precautions

While performing these steps, always remember safety first. Never attempt to jump-start or charge your battery if it's damaged or leaking. If you're unsure about any of the procedures, it's best to consult a professional mechanic.

AD

Also, always ensure your car is secure before working on it. Use wheel chocks and engage the parking brake (if it's working) to prevent the car from rolling. In case of an emergency, have a fully charged phone with you to call for help if needed.

What to Do Afterward

Once you've successfully put your Prius in neutral, don't forget to replace the EPB fuse and secure the fusible link box cover. Then, charge or jump-start your battery to get your car running again.

If your battery died frequently, it might be time for a replacement. Batteries don't last forever, and they're prone to failure due to wear and tear, heat, and other factors. Regular maintenance and checking your battery's health can help prevent unexpected breakdowns.

In the end, knowing how to put your Prius in neutral with a dead battery can save you from potential roadside troubles. Always remember to keep your car in a safe, level location when working on it, and never hesitate to consult a professional if you're unsure about any procedure. Safe driving!"

AD