Steps to Put on New Fishing Line: Expert Guide
Changing your fishing line is an essential part of maintaining your tackle and ensuring successful fishing trips. Fresh line improves casting distance, accuracy, and minimizes breakage, ultimately increasing your chances of catching fish. Here's a step-by-step guide on how to put on new fishing line.
Before you start, gather your materials: new fishing line (ensure it's suitable for your reel and type of fishing), line cutter, pliers (optional), and protectants if you're using monofilament line. Always read the manufacturer's instructions for specific guidelines.
Choosing the Right Fishing Line
Selecting the appropriate line is crucial for your fishing experience. Monofilament, fluorocarbon, and braided lines each have unique properties.
Monofilament: affordable, easy to use, and stretches to absorb shock. It's great for average fishing but has lower abrasion resistance.
Braided Line
Braided line, made of interwoven fibers, offers greater strength, less stretch, and better casting distance. It's ideal for heavy-duty applications and saltwater fishing. However, it's more expensive and can damage your reel if not used correctly.
Fluorocarbon line: nearly invisible underwater, offering excellent abrasion resistance. It's sensitive and has low stretch, making it a top choice for subtle presentations. It's more expensive than monofilament and has lower tensile strength.
Preparing Your Reel
Before installing new line, inspect your reel for any damages or wear. Clean it and ensure all moving parts are lubricated for optimal performance.
Next, remove the old line. Most reels have an arbor lock button that prevented the spool from turning. Press this button and simultaneously pull the line with your free hand to release it. Once you've removed the old line, label your spool with the type and pound test of the new line before proceeding.
Threading the Line Through the Reel
Start by tying an improved clinch knot (or your preferred knot) to the end of your new line. Ensuring the tag end is about 6 inches long, trim it with line cutters. This knot will pass through the rod guides easier than a standard knot.
Insert the tag end of the line through the line hole on the spool, leaving a slight overhang. Using your fingers or a rod, gently pull the line so that the knot is against the spool. Secure the line with duck tape or another method to prevent it from spinning freely.
Filling the Spool Properly
Fill your reel with new line by holding the rod at a 45-degree angle, keeping the line taut, and consistent tension. Overfilling can cause issues with casting and curl, while underfilling can result in tangles and a mess.
For monofilament, fill the reel until the line reaches the bottom edge of the reel's spool. For braided line, allow half the spool to be empty to prevent backlash and allow for better casting.
Fishing Knots
Understanding how to tie a good knot is essential for securing your line. The improved clinch knot is an excellent all-around knot, holding 95% of the line's original strength. Palomar and double uni knots are also popular choices.
When tying any knot, ensure the line is dry, and there's no memory in the line from the spool. Make your loops and turns firm but not too tight, as this can damage the line.
Checking Your Work
Give your reel a quick inspection. Ensure the line is wound evenly, with no loops or tangles. Check that your knot is tied correctly and securely, and that there are no sharp points or kinks in the line that could cause breakage.
Protect your new line using a protectant or UV-blocking coating to prevent degradation from sunlight and bacteria. This step helps maintain the durability and strength of your line.
Now you're ready to fish with your new line! Practice casting in an open area to get a feel for your new line. Happy fishing!