Step-by-Step Guide: How to Put On Dexcom G6
Ready to effortlessly monitor your glucose levels? The Dexcom G6 is here to make your life easier. Unlike its predecessors, the Dexcom G6 continuous glucose monitoring (CGM) system allows you to wear it for up to 10 days, eliminating the need for frequent sensor replacements. Let's guide you through the simple process of putting on the Dexcom G6.
Before you start, ensure you have your Dexcom G6 sensor, transmitter, and alcohol swabs. Performing this process in a clean and comfortable setting will help maintain your sensor's effectiveness.
Preparing Your Dexcom G6
Your Dexcom G6 kit contains a sensor, a transmitter, and alcohol swabs. Start by unboxing these components to ensure you have everything you need.
Next, locate theSerializable number on the back of the transmitter. This number must be entered into your receiver or integrated mobile device for the two devices to sync.
Inserting theCoin Batteries
Your Dexcom G6 transmitter requires coin cell batteries to function. Carefully remove the battery compartment cover and insert the batteries, ensuring they face the correct direction. The positive side (+) should be facing upwards.
Once the batteries are in place, replace the battery compartment cover. A clicking sound indicates the cover is securely locked.
Initializing Your Dexcom G6
With the batteries inserted, it's time to turn on your transmitter. Press and hold the side button until the screen displays an animation. Once the animation stops and the time is displayed, your transmitter is powered on and ready to be paired with your receiver.
Now that your transmitter is active, let's calibrate it with your sensor.
Inserting the Dexcom G6 Sensor
The Dexcom G6 sensor is inserted into your body using an automated insertion device. This device ensures a quick, easy, and painless process that takes only a few seconds.
First, cleanse the insertion site using an alcohol swab to create a suitable environment for your sensor.
Positioning the Sensor
Remove the protective cap from the sensor by twisting it counterclockwise. Then, remove the insertion device cap by pulling it straight off.
Press the sensor firmly against the insertion site until you hear the insertion device click.
Activating the Insertion
Once you hear the click, pull the yellow activation ring downwards with steady, even pressure. This action causes the insertion device to release the sensor into your body.
The sensor will appear in your receiver shortly after insertion. However, it may take a few hours for the sensor to start providing accurate readings.
Now that you've successfully inserted your Dexcom G6 sensor, you're all set to enjoy continuous glucose monitoring.