How to Fit a Horse Harness: Step-by-Step Guide
Saddling up your horse for a ride often involves using a horse harness, especially for draft work, driving, or long rides. A harness distributes the horse's weight evenly, protecting the horse's back and promoting proper riding posture. Here's a step-by-step guide on how to put on a horse harness correctly and safely.
Before you begin, ensure you have the right equipment. A full harness includes the following components: collar, breeching, girth, crupper, and trace chains. Gather these, along with a Grosgrain strap for proper adjustments, and you're ready to start.
The Collar
The collar goes around your horse's neck and shoulders, distributing the weight evenly. Start by positioning the collar loosely around your horse's neck. The buckles should be on the left side, facing towards the rider or driver.
Adjust the collar so that it sits directly behind the horse's shoulder blades. The top of the collar should be at least 4 fingers wide, and the horse should be able to comfortably lower its head to the ground. Fasten the buckles securely, but not too tightly, allowing one or two finger widths between the buckle and the horse's skin.
Adjusting the Collar Strap
The collar strap runs from the front of the collar, over the horse's withers, to the back. This strap helps adjust the collar's position. Pull the strap from the front, bringing the collar back and up until it sits correctly behind the horse's shoulders. Tie the strap in a neat, secure knot.
Incorrect adjustment can cause discomfort or rubbing, so ensure the collar fits snugly but comfortably, leaving no gaps or bunching.
The Breastcollar
The breastcollar connects the harness's left and right sides, running across the horse's chest. Position it so that it lies flat against the horse's chest, not too high (which could cause discomfort or rub) or too low (which could interfere with the horse's movement).
Fasten the breastcollar buckles securely. The straps on either side should be of equal length. If not, adjust the straps until they are even. Check that the horse can breath comfortably and that the breastcollar isn't too tight.
The Girth and Crupper
The girth and crupper work together to keep the harness in place. The girth goes around your horse's girth, just behind the withers, while the crupper wraps around the horse's rump.
Begin by placing the girth loosely around your horse, positioning it so that the buckles are on the left side, facing back. Fasten the girth, but don't pull it tight yet. Now, bring the crupper strap up from the horse's rump, connecting it to the girth. Ensure it's positioned correctly - not too high or low, and not too tight, as this could cause discomfort.
The Nape Strap
The nape strap runs from the breastcollar to the top of the girth, helping to distribute the weight more evenly. Pass the nape strap through the ring at the top of the girth, then buckle it securely. It should be snug but not too tight.
Check that the harness is well-fitted and balanced. The horse should be able to move freely without discomfort. Ensure all straps are of equal length and fasten securely, but not too tight.
The Breeching
The breeching goes around your horse's hindquarters, connecting to the girth and crupper. It helps keep the harness in place and distributes the weight across the horse's hindquarters. Begin by placing the breeching loosely around your horse, with the buckles on the left side, facing back.
Fasten the breeching, ensuring it fits snugly but comfortably. The breeching should not be too high or too low, and it should not rub or cause discomfort. Finally, connect the breeching to the girth and crupper, ensuring all straps are well-fitted and balanced.
The Trace and Tugs
For driving, or when using a sidepull, you'll need to add the trace and tugs. The trace runs from the top of the collar to the harness ring at the front of the breastcollar, while the tugs connect the bit or sidepull to the harness.
Begin by connecting the trace to the harness ring. Pull the trace from the front, bringing it back and up to the withers. This helps distribute the weight more evenly. Attach the other end of the trace to the harness ring at the front of the breastcollar. Next, connect the tugs to the bit or sidepull, ensuring they're firmly in place.
Final Checks
Before saddling up, do a final check to ensure the harness is properly fitted and balanced. Tug gently on the harness to ensure it's secure. Check that all straps and buckles are well-fastened, and that the horse can breathe and move comfortably.
The timely adjustment and fitting of the horse harness can greatly affect the horse's performance, comfort, and health. Learning how to put on a horse harness correctly is essential for any horse owner or admirer seeking to enjoy horseback riding or driving experiences.