how to put drum brakes back together

How to Reassemble Drum Brakes Step-by-Step

By Rachel Moore
AD

Correctly reassembling drum brakes after service is crucial to ensure optimal performance and safety. This guide walks you through the process, from disassembly to putting your drum brakes back together, step by step. We'll cover essential components, common mistakes, and pro tips for a smooth reassembly.

Before you begin, gather your tools and parts. You'll need a brake adjustments kit, bore gauge, micrometer, screwdriver set, pliers, and grease. Also, ensure you have the correct hardware and replacement parts, as some components may be worn and need replacing.

Understanding Drum Brake Components

Familiarizing yourself with drum brake components is vital for a correct reassembly. Key components include the brake drum, brake shoes, wheel cylinder, retraction springs, adjusting screws, return spring, and brake hardware.

AD
an image of the parts of a motorcycle wheel and its description in english or spanish
an image of the parts of a motorcycle wheel and its description in english or spanish
How to Assemble Drum Brakes (A Step-by-Step Guide)
How to Assemble Drum Brakes (A Step-by-Step Guide)
Everything You Need to Know About Converting Drum Brakes to Disc
Everything You Need to Know About Converting Drum Brakes to Disc

The brake shoes and wheel cylinder form the bushes that press against the brake drum's inner surface. The retraction springs pull the shoes away from the drum, while the adjusting screws compensate for brake pad wear. The return spring helps keep the brake shoes retracted when not in use.

Preparation: Inspect and Clean Components

Begin by meticulously cleaning all components. Use brake cleaner to remove dirt, grease, and brake dust. Inspect each part for any signs of damage, wear, or corrosion. Replace any faulty components with new ones.

How to Convert Drum Brakes to Disc Brakes
How to Convert Drum Brakes to Disc Brakes
How to Adjust Drum Brakes
How to Adjust Drum Brakes

Check the brake drum for cracks, deep grooves, or hot spots. A pitted or worn drum may not provide enough friction to stop your vehicle effectively. If in doubt, replace the drum.

Measuring Key Components: Adjustment and Fit

Before installation, measure key components to ensure they're within manufacturers' specifications:

AD
  • Check the thickness of the brake shoes and pads. Although measurements vary by brake system, the shoes and pads should ideally be within 0.015 to 0.030 inches of each other.
  • Use a bore gauge to measure the inside diameter of the brake drum. The drum's bore should be compatible with the brake shoe adjustment to ensure proper contact and efficient braking.

If any measurements fall outside the recommended range, adjust the brake hardware accordingly or replace the faulty components.

Installing the Primary Brake Shoes

Start by installing the primary brake shoes. The primary shoe bears the majority of the braking force and is typically marked with an "L" or "P".

Thread the primary shoe's adjusting screw through the brake backing plate's hole. Engage the shoe's rear edge with the retraction spring, then secure it to the brake backing plate using the shoe installation spring support.

AD

Securing the Secondary Brake Shoe

Install the secondary brake shoe, which aids in applying pressure to the brake drum. Align the shoe's adjusting screw with the brake backing plate's hole and secure it in place.

Since the secondary shoe doesn't bear the full braking force, it may not need an individual retraction spring. Connect the secondary shoe's adjuster arm to the primary shoe's adjusting lever using a connecting rod.

Installing the Wheel Cylinder

Insert the wheel cylinder pushed into the brake backing plate until its pistons are completely retracted. Ensure the cylinder's bleed screws align with the brake backing plate's holes.

AD

Position the wheel cylinder's anchor clips into the retaining hooks on the brake backing plate. Engage the cylinder's pad return spring with the corresponding hook on the brake backing plate.

Installing the Brake Drum and Adjusting Hardware

Slide the brake drum over the brake shoes and wheel cylinder. Align the drum's holes with the brake hardware, then install the retaining clips and lock washer.

Adjust the brake shoes' clearance with the brake drum. Spin the brake drum by hand to check for contact with the shoes. If the shoes meet resistance, adjust the brake shoes' clearance by turning the adjusting screws until they're within the recommended range.

Bleeding the Brake System

After adjusting the brakes, bleed the brake system to remove any air pockets. Follow the manufacturer's recommended process for bleeding, which typically involves opening a bleeder valve while a helper presses the brake pedal.

Check for any leaks or signs of improper function and make any necessary adjustments. Test drive the vehicle at low speeds to ensure proper braking performance before returning to normal road use.

Congratulations! You've successfully reassembled your drum brakes. Regularly inspect and maintain your braking system for optimal performance and vehicle safety. Happy driving!

AD