how to put bobbin in janome sewing machine

**Easy Steps: How to Install Bobbin in Your Janome Sewing Machine**

By Michael Lewis
AD

Attaching a bobbin to your Janome sewing machine might seem daunting at first, but with a little guidance, it's a breeze. This step-by-step guide will walk you through the process, ensuring your bobbin is securely in place and ready to create beautiful stitches.

Before we dive in, let's familiarize ourselves with the Janome bobbin. Janome uses class 15 bobbins, which are easy to find andcome in a variety of colors.

Preparing Your Janome Sewing Machine

Before you start, ensure your sewing machine is unplugged for safety. This is a basic step but an important one to remember every time you work on your machine.

AD
How to Properly Insert the Bobbin in a Janome 8200 Sewing Machine
How to Properly Insert the Bobbin in a Janome 8200 Sewing Machine
Threading a Front Load Bobbin! #sewing #sewingmachine #janome #janomeamerica
Threading a Front Load Bobbin! #sewing #sewingmachine #janome #janomeamerica
Aunt Jane showing how to load a bobbin on a Kenmore Sewing Machine
Aunt Jane showing how to load a bobbin on a Kenmore Sewing Machine

Next, lower the presser foot and move thenumeric dial to the 'Stop' position. This will give you full access to the bobbin area and prevent any accidental stitching.

Drop-in Bobbin System

The Janome uses a top-loading, drop-in bobbin system. This means the bobbin sits upright in the bobbin case, making it easy to access and load.

How to Put a Bobbin in Any Sewing Machine – 4 Ways
How to Put a Bobbin in Any Sewing Machine – 4 Ways
How to Load a Sewing Bobbin
How to Load a Sewing Bobbin

To access the bobbin area, open the bobbin case cover on the left side of your machine. You'll see the bobbin case nestled inside. Unscrew the metal ring holding the case in place, then lift the case out gently. You'll now see the bobbin well, where your bobbin will sit.

Loading the Bobbin

With the bobbin case removed, take your Janome class 15 bobbin and wind it with your chosen thread. Make sure to keep the thread tension even and close the loop at the end to prevent unraveling.

AD

Place the bobbin in the bobbin well with the spool of thread on top. The thread should be shed under the tension spring. The little arrow etched on the bobbin should point counter-clockwise, following the direction of the bobbin's rotation. If your bobbin is reversed, your machine won't function correctly.

Reassembling the Bobbin Area

Now that your bobbin is securely in place, it's time to reassemble the bobbin case. Start by placing the bobbin case back into the machine, ensuring the threading is correct and not tangled.

Replace the metal ring that secures the bobbin case in place. Give it a gentle tightening to ensure the case is secure. Don't overtighten, as this could damage your machine.

AD

Threading Your Janome

With your bobbin now loaded, it's time to thread your machine. Start by threading the top thread through the tension disc, then follow the path as indicated in your machine's manual - usually from right to left.

Insert the thread into the take-up lever slot and follow it towards the needle plate. Finally, guide the thread through the needle and down to the bobbin area. Pull gently on the thread to ensure it's all the way through the machine.

Testing Your Machine

Before you start sewing, test your machine by lower-ing the presser foot and giving the dial a small turn. This should cause the needle to drop and stitch a small sample. If the bobbin is loaded correctly, you should see stitches forming.

AD

If everything looks good, raise the presser foot and move the machine dial back to 'Stop'. You're now ready to create beautiful stitches with your Janome sewing machine!

Happy sewing! Remember, practice makes perfect. Don't hesitate to test your machine and re-thread if needed. Soon enough, loading the bobbin will become second nature.

AD