how to put belt back on kirby vacuum

How to Put Belt Back on Kirby Vacuum

By Mark Jones
AD

Have you been динами�ically cleaning with your Kirby vacuum, only to find the belt has come off? Don't stress, it's a common issue. Here's a step-by-step guide on how to put the belt back on your Kirby vacuum.

Before we dive into the process, safety first. Unplug your vacuum and ensure it's cool. Also, gather a flathead screwdriver and the belt if it's not already with the vacuum.

Accessing the Belt Area

The first step is to access the area where the belt sits. On most Kirby vacuums, this is at the bottom of the machine, near the roller brush.

AD
Changing Belt and Roller on a Kirby G3 G4 G5 G6 Ultimate Diamond Sentria
Changing Belt and Roller on a Kirby G3 G4 G5 G6 Ultimate Diamond Sentria
How to Replace Kirby Vacuum Belt
How to Replace Kirby Vacuum Belt
How to put a belt on a Kirby Vacuum
How to put a belt on a Kirby Vacuum

To expose this area, you'll need to remove the bottom plate. Start by flipping your vacuum over. You should see four screws at the bottom. Use your flathead screwdriver to unscrew these, then gently pry off the plate.

Identifying the Belt Components

With the bottom plate off, you'll see two main components: the motor drive shaft and the brush roller. The belt should be looping around these two components.

How to Change the Belt on a Kirby Vacuum | Homesteady
How to Change the Belt on a Kirby Vacuum | Homesteady
How to replace the belt in a Kirby vacuum cleaner
How to replace the belt in a Kirby vacuum cleaner

If the belt has fallen off, don't worry. It should be in the area you've exposed. If not, check the roller brush and the area around it.

Installing the Belt Back On

To reinstall the belt, you'll need to loop it around the motor drive shaft first. The wider side of the belt should face towards the motor. Then, you'll loop the belt around the roller brush. Make sure the belt is snug but not too tight.

AD

Once the belt is on both components, you can gently tug on it to ensure it's secure. If it feels loose, you may need to adjust it. If it's too tight, it could cause your vacuum to overheat.

Reassembling Your Kirby Vacuum

Now that the belt is back on, it's time to put your vacuum back together. Start by placing the bottom plate back over the opening. Ensure all the components align correctly.

Use your screwdriver to reattach the bottom plate. Tighten the screws securely, but not so tight that you strip the threading.

AD

Testing Your Kirby Vacuum

Before you start cleaning, it's a good idea to test your vacuum. Plug it in and turn it on. Listen for the roller brush to spin. If it does, you've successfully put the belt back on.

If the brush isn't spinning, double-check that the belt is properly installed. It might be too loose or too tight. Adjust as needed.

And there you have it! You've successfully put the belt back on your Kirby vacuum. With a bit of maintenance, your vacuum should serve you well for years to come. Next time you clean, remember to regularly check the belt to ensure it's still in good condition.

AD
AD