how to put a chain back on a mountain bike

Reputtering Your Ride: A Step-by-Step on How to Put a Chain Back on a Mountain Bike

By Melissa Jackson
AD

Ever found yourself out on a trail, enjoying the adrenaline rush of mountain biking, only to have your chain pop off due to a misaligned gear? It's a common occurrence, but it doesn't have to disrupt your ride. In this guide, we'll walk you through the steps of how to put a chain back on a mountain bike, getting you back on track in no time.

Before diving in, let's briefly talk about why chains pop off in the first place. This usually happens due to a lack of lubrication, wear and tear, or simply because the derailleur isn't properly adjusted. Now, let's get to the heart of the matter - fixing that chain.

Before you dive into the process of putting the chain back on, you need to make sure your bike is in a position that allows you easy access. Find a stable surface to rest your bike on, like a flat rock or a paved path.

Next, assess what caused your chain to pop off. Is your derailleur out of alignment? Is there excessive wear on the chain or cassette? Knowing the cause can help you prevent it from happening again. For now, though, it's time to focus on getting your chain back on track.

Tools Needed

You'll need a few tools to carry out this operation. The most important are:

AD
How To Change A Mountain Bike Chain: Easy Step-by-Step Guide
How To Change A Mountain Bike Chain: Easy Step-by-Step Guide
The Complete Guide To DIY Bike Repair And Maintenance
The Complete Guide To DIY Bike Repair And Maintenance
How To Tighten A Bike Chain
How To Tighten A Bike Chain
  • Your hands - for manipulation and adjustment
  • A set of Allen keys - to adjust your derailleur
  • Lubricant - to prevent future chain misfortunes

Once you've gathered your tools, you're ready to get started. Let's begin with the basics.

Basic Chain Installation

First, look at your bike's drivetrain, which consists of the crankset, chainrings, chain, and cassette. The chain goes around the chainrings at the front and the cogs at the back. You'll need to re-route the chain through these.

Mountain Bike Hacks | Cycling Tips
Mountain Bike Hacks | Cycling Tips
HOW TO FIX A BROKEN DERAILLEUR ON THE TRAIL - Mountain Bike Action Magazine
HOW TO FIX A BROKEN DERAILLEUR ON THE TRAIL - Mountain Bike Action Magazine

Start by placing the chain around the largest front chainring and the largest rear cog. Then, shift your gears, moving the chain to a smaller cog at the back. This should create enough slack for you to pull the chain up and around the teeth of the rear cogs. Make sure it's fully engaged before you continue.

Advanced Techniques: Aligning the Derailleur

Once the chain is back on, it's time to ensure your derailleur is correctly aligned. A misaligned derailleur is a common cause of chain slippage. Let's correct this.

AD

The derailleur is your bike's chain guide. It has high and low limit screws that allow you to adjust its range. The high limit screw controls the innermost cog, while the low limit screw controls the outermost cog. Your goal is to find a balance between these two so that your chain shifts smoothly across all gears.

Adjusting the High Limit Screw

Start by shifting your chain to the smallest cog at the back. This forces the derailleur cage into the smallest guide position. Turn the high limit screw clockwise until it touches the derailleur stop. Then, turn it back slightly (approximately one full turn).

Test the limit by shifting to the smallest cog. If your derailleur doesn't rub against the biggest chainring or cause chain rub on the smallest cog, you're in the right ballpark. If not, you'll need to make further adjustments.

AD

Adjusting the Low Limit Screw

Next, shift your chain to the largest cog at the back. This forces the derailleur cage into the largest guide position. Turn the low limit screw counterclockwise until the derailleur cage just touches the smallest cog. Turn it back slightly (about half a turn).

Wiggle your shifters to check the smoothness of your shifting. If you feel any resistance or hear any unusual sounds, you may need to make further adjustments. With a little trial and error, you should get the hang of it.

There you have it - a comprehensive guide on how to put a chain back on a mountain bike. Remember, prevention is always better than cure. Regular cleaning, lubrication, and maintenance can help you minimize chain slip occurrences. Happy riding!

AD
AD