how to put a bumper back on

Step-by-Step: How to Install a Bumper Back On

By Daniel Miller
AD

Whether you've accidentally reversed into a pole or your trusted vehicle has come across a rogue pothole, know that damaging your bumper is more common than you might think. Don't worry, repairing it often doesn't mean a costly trip to the body shop. Many stubbed, cracked or torn-off bumpers can be mended or replaced as a DIY project. This guide will walk you through a simple, step-by-step process on how to put a bumper back on, ensuring both your safety and your vehicle's aesthetic appeal.

First things first, it's crucial to assess the damage. If the bumper is merely cracked or scratched, you might be able to buff it out with a sanding disc and some body filler. However, if the entire bumper needs replacing, follow this guide.

Gathering Tools and Materials

Before you begin, ensure you have all the necessary tools and materials. The exact requirements may differ depending on your vehicle make and model, but generally, you'll need the following:

AD
HOW TO MAKE STOCK BUMPERS LOOK COOL
HOW TO MAKE STOCK BUMPERS LOOK COOL
HOW TO MAKE A CUSTOM BUMPER [PART 2]
HOW TO MAKE A CUSTOM BUMPER [PART 2]
How To Build Your Own Tube Bumper
How To Build Your Own Tube Bumper
  1. New bumper (matching your vehicle's make, model, and year)
  2. Jack and jack stands
  3. marines tape (blue preferably)
  4. Socket wrench
  5. Socket set
  6. Screwdriver set (Philips and flathead)
  7. Ratchet and wrenches
  8. Paint and primer (matching your vehicle's color)
  9. New screws and bolts
  10. Measuring tape
  11. Drill and drill bits

Removing the Old Bumper

Start by blocking your tires to ensure the vehicle doesn't roll. Then, using your jack and jack stands, lift your vehicle until you can safely crawl underneath. Here, remember to keep yourself secure and stable at all times.

Under the bumper, you'll see screws or bolts attaching it to the vehicle's frame. Use your socket wrench, ratchet, and screwdrivers to remove them. Once done, gently pull off the bumper, loosening any wiring or clips for a smooth removal.

How To Straighten a Bumper with a Hustler Stick Alignment Bar
How To Straighten a Bumper with a Hustler Stick Alignment Bar
MOVE Bumpers DIY Rear Bumper Build and Install
MOVE Bumpers DIY Rear Bumper Build and Install

Preparing the Vehicle for the New Bumper

After removing the old bumper, clean the mounting surfaces to remove any dirt, grease, or rust. This ensures a secure fit for the new bumper. If necessary, use marine tape to fill any holes left by the old bumper's mounting screws or bolts.

Now, measure the position of the old bumper's mounting points onto the new bumper. Use a drill to create new holes where needed, ensuring they match the size and position of the old holes. Now, your new bumper is ready for installation.

AD

Attaching the New Bumper

Begin by lining up the new bumper with the vehicle's framework. Ensure it aligns properly with the vehicle's body and that the mounting holes match the vehicle's screw/bolt holes. Once lined up, use your marine tape to hold the bumper in place.

With the help of a friend if necessary, gently lift the vehicle using your jack, ensuring not to apply too much pressure onto the new bumper. Secure it with jack stands for stability. Now, reattach the bumper using your new screws or bolts, ensuring they're tight but not overtightened.

Wiring and painting

Reattach any disconnected wiring. If you've recently replaced other bumper parts or lights, now is the time to verify they're functioning correctly. Should you suspect a fault, consult a professional mechanic.

AD

Finally, paint the new bumper to match your vehicle's color. Ensure to apply primer first, letting it dry, then paint in a well-ventilated area. Let the paint dry fully before touching or reinstalling any parts you removed for painting.

armoury," DR^−/−^ DR

AD