Hole Punch: Mastering Penny Edition
Ever wondered if it's possible to create a hole in a penny? You might think that punching a hole through currency is disrespectful or even illegal, but there are legitimate reasons why someone might want to do this. For instance, you could attach your favorite penny to a keychain or a piece of jewelry. So, how do you go about punching a hole in a penny without destroying it? Let's explore this unique DIY project.
First, let's address the elephant in the room: Yes, it's legal to deface U.S. currency, including punching a hole in a penny. The U.S. Secret Service has stated that they won't pursue criminal charges for defacing coins unless it's done for fraudulent purposes. Now that we've clarified that, let's dive into the process.
Understanding Penny Material
Before you start punching, it's essential to understand what you're working with. Pennies are made of zinc since 1982, wrapped in a thin layer of copper. This composition might surprise you, as pennies used to be made almost entirely of copper. The switch to zinc was due to rising copper prices. This change makes it easier to punch a hole in a penny compared to solid copper coins.
However, zinc is more brittle than copper, so be careful not to damage the coin while punching. Also, keep in mind that the copper layer on newer pennies might come off during the process, leaving you with a silver-colored coin.
Choosing the Right Tool
selecting the right tool is crucial for punching a clean hole in your penny. Avoid using nail punches or hammering a nail, as this can damage the coin. Instead, opt for a coin punch designed for metals. These tools feature a sharp punch and an anvil to ensure a clean, even hole.
If you don't have a coin punch, you can use a drill with a small drill bit. Choose a bit size that's slightly larger than the hole you want to create. This method requires more control and practice to prevent damaging the penny.
Coin Punch Method
1. Place the penny on a solid, flat surface like a cutting board or a block of wood. This provides a stable surface for the anvil of your coin punch.
2. Position the coin punch directly above the center of the penny. Apply gentle but firm pressure to punch a straight, clean hole. Be careful not to press too hard, as this can damage the coin or cause the punch to slip off-center.
Drill Method
1. Secure the penny to a drill press or use a vice to hold the coin in place. This ensures that the penny remains stationary while drilling.
2. Slowly lower the drill bit onto the penny's center. Apply gentle pressure as you drill, monitoring the progress closely. Stop drilling when the bit emerges from the other side of the penny. Allow the drill bit to cool before continuing to prevent overheating.
Carefully Enlarge the Hole (Optional)
If you're punching a hole in a penny for a keychain or lanyard, you might need to enlarge the hole. Be cautious while doing this, as it's easy to damage the coin. You can use a series of increasingly larger drill bits or a deburring tool designed for metals.
Remember, enlarging the hole too much can weaken the penny, making it more susceptible to breaking. Only enlarge the hole if it's necessary for your project.
Clean Up and Prevent Tarnish
After punching a hole in your penny, clean the coin to remove any debris. A soft cloth dampened with water and mild soap should suffice. Be gentle to prevent damaging the coin's edges.
To prevent tarnish, store the penny in a cool, dry place away from moisture. You can also apply a thin layer of clear nail polish to the hole's rim, creating a barrier that prevents tarnish.
Now that you know how to punch a hole in a penny, you can explore various DIY projects involving this classic American coin. Whether you're creating personalized jewelry or unique home decorations, punching a hole in a penny can open up a world of creative possibilities. So, grab a penny and your coin punch, and start crafting something extraordinary!