how to pull flywheel without puller

How to Remove a Flywheel Without a Puller: Expert Tips

By Christopher Allen
AD

If you're a cyclist or bike enthusiast, you may find yourself in a situation where you need to remove or replace your bike's wheels. While a flywheel puller is often used for this task, it's not always available. This guide will show you how to pull a flywheel without a puller, using some simple tools and techniques.

Before we dive into the process, it's essential to remember that removing a flywheel requires patience, care, and some basic mechanical skills. Also, ensure you have the right tools and safety equipment, including gloves and safety glasses.

Understanding Your Bike's Wheels

The first step in removing a flywheel is understanding how your bike's wheels work. Most bikes use hubs that hold the axle in place. On the side you're working on, there's usually a cone-shaped nut that can be loosened and tightened. On the other side, there's a lock ring that holds the cone in place.

AD
How to Remove (pull) a flywheel on a Briggs and Stratton Engine (any small engine)
How to Remove (pull) a flywheel on a Briggs and Stratton Engine (any small engine)
How to Install a Flywheel
How to Install a Flywheel
How to Install a Flywheel
How to Install a Flywheel

In this guide, we'll focus on removing the rear wheel, as it's the one that typically uses a flywheel. The process is similar for the front wheel, but it's often easier to remove due to less tension on the spokes.

Gather Your Tools

Before you start, gather the tools you'll need. You'll need a wrench that fits your bike's nuts (often a 15mm or 17mm, but it can vary), a flathead screwdriver, a large adjustable wrench, and some penetrating oil like WD-40. Additionally, you may need an adjustable spanner or internal wrench for the lock ring.

a person on a trampoline with the words crazy flip in front of them
a person on a trampoline with the words crazy flip in front of them
PULL THROUGH THE LEGS : How to Tutorial
PULL THROUGH THE LEGS : How to Tutorial

You might also find a wheel removal tool helpful, although these aren't strictly necessary. The most crucial aspect is having a sturdy adjustable wrench that can apply a good amount of force.

Loosen the Cone Nut

Once you've gathered your tools, start by loosening the cone nut on the side of the wheel opposite the brake. You'll need to use a wrench that fits the nut. In most cases, this is a 15mm or 17mm wrench. Loosen the nut by turning it counterclockwise.

AD

Be careful not to lose the lock ring or the cone nut while loosening. If they start to come off, you can use a large adjustable wrench or even a pair of locking pliers to hold them in place. If you're having trouble, you can try applying some penetrating oil to help loosen the nut.

Removing the Lock Ring

After you've loosened the cone nut, you'll need to remove the lock ring, also known as the castle nut. This keeps the cone nut from backing off under tension. The lock ring is typically secured with a small set screw, which you can remove with a flathead screwdriver.

Once the set screw is removed, the lock ring might come off easily. If it's stuck, you can try using a pair of locking pliers to grip the flats on the lock ring and turn it counterclockwise. If it's still too tight, you can use your large adjustable wrench to hold the lock ring while turning the cone nut clockwise with another wrench.

AD

Pulling the Wheel Free

Now that the cone nut and lock ring are removed, you can start pulling the wheel free. You might need a lot of force, so make sure to use both hands and take your time. It can help to use the bike stand or a wheel removal tool for leverage.

As you pull, the wheel may squeak or pop slightly as the spokes release their tension. This is normal, but if the wheel is not coming free with reasonable effort, it may be necessary to adjust the wheel's alignment or spoke tension. If the wheel is still not budging, you might need to apply some penetrating oil to the hub or use some heat (like a heat gun) to expand the metal slightly.

Greasing and Reassembling

Once your wheel is free, make sure to grease it before putting it back on. This will help ensure smooth operation and prevent squeaking. Also, check the alignment and spoke tension of the wheel before reinstalling it.

AD

When reinstalling the wheel, remember to first place the new lock ring on the axle, then slide the cone nut on, and finally tighten the cone nut by turning it clockwise. Make sure not to overtighten, as this can damage the wheel's bearings. Once the nut is snug, use your wrench and a block of wood to apply the final turning force.

Congratulations, you've successfully removed and replaced your bike's flywheel without a puller! Regular maintenance like this is crucial for keeping your bike in top condition and ensures a safe, smooth riding experience. Happy cycling!

AD