how to program wayne dalton garage door remote

Program Wayne Dalton Garage Door Remote: A Step-by-Step Guide

By Steven Martin
AD

Ever found yourself stuck outside, realizing you've left your garage door remote inside? Don't worry, Wayne Dalton garage doors have a simple solution - they come with a keypad that allows you to program a new remote. Let's dive into how to program a Wayne Dalton garage door remote in a few easy steps.

First, it's crucial to understand that Wayne Dalton garage doors use a wireless technology called Secure Multi-Frequency (SMF). This technology helps prevent code duplication and enhances security. Here's a step-by-step guide on how to program your new remote using the keypad.

programming with the keypad

The keypad is located on the outside of your garage door. It's typically mounted near the door handle or on the wall adjacent to the door. Before you start, ensure the power to your garage door opener is turned on.

AD
Programming Wayne Dalton Remotes and Keypads | Veteran Garage Door Repair / Same Day Service
Programming Wayne Dalton Remotes and Keypads | Veteran Garage Door Repair / Same Day Service
Wayne Dalton Garage Door Opener 3 Button Remote Model 327310 / 3973C
Wayne Dalton Garage Door Opener 3 Button Remote Model 327310 / 3973C
How to Reprogram and Reset Your Garage Door Keypad Password
How to Reprogram and Reset Your Garage Door Keypad Password

To begin, you'll need to enter your personal identification number (PIN) into the keypad. This PIN is unique to your garage door system and should have been provided to you when you purchased your Wayne Dalton garage door opener.

Entering your personal identification number (PIN)

Locate the numeric keypad on your garage door. Enter your PIN slowly and carefully, pressing the pound (#) key after you've entered your four-digit PIN. The 'lock unlock' light on the keypad will glow to indicate that you've entered your PIN correctly.

Garage Door Opener - Universal Remote - Easy How to Program
Garage Door Opener - Universal Remote - Easy How to Program
How To Program A Genie Remote
How To Program A Genie Remote

If you don't know your PIN, you can reset it using the following steps:

  1. Locate the 'learn' button on your garage door opener. This is usually a small button near the motor unit.
  2. Press and hold the 'learn' button for about 10 seconds. The 'lock unlock' light on the keypad will start blinking during this process.
  3. Release the 'learn' button when the light stops blinking. This will reset the PIN, and you can now set a new one.

Programming the remote

Once you've successfully entered your PIN, you're ready to program your new remote. Make sure your new remote is within 10-15 feet of the keypad.

AD

Follow these steps to program your new remote:

  • On the keypad, locate the 'program' button. It's usually labeled with a small remote icon.
  • Press and hold the 'program' button for 2-3 seconds until the 'lock unlock' light starts blinking rapidly. This indicates that the system is in programming mode.
  • Press and release the button on your new remote that you want to program. The 'lock unlock' light on the keypad will stop blinking and then glow steadily. This indicates that your new remote has been successfully programmed.

Congratulations! You've now successfully programmed your new Wayne Dalton garage door remote. Repeat the process to program additional remotes.

Testing your new remote

Before you close this article, let's ensure your new remote is working correctly. Drive your car away from your garage and then test your new remote to make sure your garage door is opening and closing as expected.

AD

If you encounter any issues, make sure your remote's batteries are fresh and that you're not exceeding the 10-15 foot range from your garage door. If problems persist, don't hesitate to consult Wayne Dalton's customer support for further assistance.

Now that you know how to program a Wayne Dalton garage door remote, you can enjoy the convenience of having multiple remotes for your family, and the peace of mind that comes with knowing you can always access your garage. Happy programming!

AD