Mastering Somfy Awnings: Step-by-Step Guide to Program Your Remote
Are you the proud owner of a Somfy awnings system, looking to customize your shading experience? Programming your Somfy remote to control your awning can seem like a daunting task, but with the right steps, you'll be enjoying seamless control in no time. This guide will walk you through the process, ensuring you make the most out of your Somfy awning and remote.
Firstly, let's understand that Somfy offers two types of remotes: the standard remote (TILT 5) and the myLink remote. The process for both remotes is similar, but there are some slight differences that we'll cover. For now, let's dive into the basics of programming your Somfy remote for your awning.
Preparing to Program Your Somfy Remote
Before you begin, ensure you have the following ready: your Somfy awning motor, the Somfy remote you wish to program, a flathead screwdriver, and a ladder (if your awning is high off the ground). Also, make sure your awning and remote are powered on. If your awning uses a battery, replace it if necessary.
To begin, you'll need to put your remote into learning mode. For the TILT 5 remote, press and hold the '+' and '-' buttons simultaneously for about five seconds. For the myLink remote, press and hold the 'Learn' button for about three seconds. The light on your remote should be blinking, indicating it's in learning mode.
Programming the Remote to Control the Awning
Now that your remote is in learning mode, it's time to synchronize it with your awning motor. Locate the programming tab on your motor. It's usually a small, transparent window that allows you to see inside the housing. Using your flathead screwdriver, gently press and hold the metal plate inside the programming tab for about three seconds.
After releasing the metal plate, your awning should start moving. Within five seconds, press the 'Stop' button on your remote to stop the motion. If successful, the light on your remote should stop blinking and remain on, indicating that the motor has been successfully programmed.
Setting up Individual Control for Each Remote Function
Somfy remotes allow you to control multiple functions, such as opening, closing, or tilting your awning. To program individual functions, repeat the programming process mentioned above, but instead of pressing the 'Stop' button, press the corresponding function button ('+' or '-') once the awning starts moving.
For instance, to program the 'Open' function, once the awning starts moving after pressing the metal plate, press the '+' button. To program the 'Close' function, press the '-' button. Remember, you can program up to five different functions per remote.
Testing and Adjusting Your Somfy Remote
After programming, test your remote to ensure it's working correctly. Press each function button to verify that the remote is controlling your awning as expected. If not, you may need to adjust the sensitivity of your remote or the limit settings on your awning motor.
A sensitive remote may cause your awning to move unexpectedly, while a motor with incorrect limit settings may not open or close completely. To adjust these settings, consult your user manual or contact Somfy's customer support for further assistance.
Adding Additional Remotes
If you want to add more remotes, you can do so by repeating the programming process on each new remote. Ensure that the original remote is within range when programming new ones to avoid any complications. Once programmed, all remotes should work seamlessly together.
Remember, it's always a good idea to test your remotes in different areas of your property to ensure they work reliably from various locations. This step can help you determine if you need to install wireless repeaters or consider options like the myLink radio control box.
And there you have it - a comprehensive guide on how to program your Somfy remote for your awning. With these steps, you'll be well on your way to enjoying the perfect shading solution that adds comfort and convenience to your lifestyle. Happy programming!