how to program my ge universal remote

How to Program Your GE Universal Remote

By Jessica Williams
AD

Tired of juggling multiple remotes? Let your GE universal remote take control of your home entertainment system. Programming it is easier than you think. Let's guide you through this process with simple, step-by-step instructions.

Before you begin, ensure you have your GE universal remote and the original remote for the device you want to control. Also, note the code for your device from the manufacturers' list (e.g., Sony, Samsung, LG).

Understanding Your GE Remote

The first step to programming your GE universal remote is understanding its layout. The top row of buttons corresponds to brand-specific codes. Below this row, you'll find control buttons like power, volume, channel, and navigation buttons.

AD
Universal Remote Codes
Universal Remote Codes
GE Universal Remote Codes List and Guides
GE Universal Remote Codes List and Guides
UNIVERSAL REMOTE CODES
UNIVERSAL REMOTE CODES

You'll also notice the 'Setup' button labeled with an 'SEL' or 'SET' icon. This button is crucial for initializing and programming your remote. Keep it in mind as we proceed.

Setting Up Your GE Remote

Before you start programming device-specific codes, you need to set up your GE remote. Here's how:

a remote control with the words easy program to get remote in less then 2 minutes
a remote control with the words easy program to get remote in less then 2 minutes
Onn Universal Remote Codes: Program ONB13AV004 for 4 Devices
Onn Universal Remote Codes: Program ONB13AV004 for 4 Devices

1. Point your GE remote towards the device you want to control (e.g., your TV).

2. Hold down the 'Setup' button until the display shows '00'. This resets the remote to its default state.

AD

Locating Your Device Code

Now that your GE remote is set up, it's time to locate the code for your device. You can find this in the manufacturer's manual or online.

For example, if you're programming it for a Sony TV, the code might be '10086'. Write this down as we'll need it soon.

Programming Your Device Specific Codes

Now that you have your device code, it's time to program it into your GE remote. This process can vary slightly depending on your device type, so follow these instructions carefully.

AD

For our example, we'll continue with a Sony TV. If you're using a different device, replace '10086' with your device's code.

First Attempt Programming

1. Enter the three-digit brand code (e.g., for Sony, you'd press '100') on your GE remote.

2. Release the buttons when the display shows 'BRAND'. This tells your remote which device brand you're trying to program.

AD

Entering the Device Code

1. Enter the four-digit code for your device (e.g., '10086').

2. Press the 'Power' button on your GE remote. If your Sony TV turns off, the programming was successful. If not, no worries, it's common to need a different code.

Finding an Alternative Code

If the first code didn't work, don't despair. You can try alternative codes:

1. Re-enter the brand code (e.g., '100').

2. Try a different four-digit code from your manufacturer's list. If your device still doesn't respond, you may need to try another brand code and device code combination.

Programming Other Devices

Once you've successfully programmed one device, follow the same process to program other devices like your DVD player, satellite receiver, or audio system.

Each time, re-enter the brand code, then trial different device codes until you find the one that works. Keep track of which code corresponds to which device for future reference.

There you have it! You've successfully programmed your GE universal remote. Enjoy the convenience of controlling your entire home entertainment system with a single remote. Happy viewing!

AD