how to program dodge durango key fob

Programming Your Dodge Durango Key Fob: A Step-by-Step Guide

By Andrew Jackson
AD

Ever found yourself locked out of your Dodge Durango due to a dead key fob battery? Don't panic! You can program a replacement key fob yourself, saving you time and money. This step-by-step guide will walk you through the process of programming a new key fob for your Dodge Durango.

Before we dive in, ensure you have a new key fob designed for your specific model year and trim. Also, gather a pair of working key fobs to help with the programming process. Let's get started!

Preparing Your Dodge Durango and Key Fobs

First, make sure your Durango is in 'Park' (or 'N' for manual transmissions) with the engine turned off.

AD
Programming a new key fob at home (NO DEALERSHIP!) All Jeep, Dodge and Chrysler vehicles.
Programming a new key fob at home (NO DEALERSHIP!) All Jeep, Dodge and Chrysler vehicles.
Step-by-Step Guide: Programming a Dodge Key Fob
Step-by-Step Guide: Programming a Dodge Key Fob
X Autohaux Replacement Keyless Entry Remote Car Key Fob M3N5Wy783X 433Mhz For Dodge Grand Caravan Challenger Charger Durango For
X Autohaux Replacement Keyless Entry Remote Car Key Fob M3N5Wy783X 433Mhz For Dodge Grand Caravan Challenger Charger Durango For

Take one of your working key fobs and insert it into the ignition. Turn the ignition to the 'On' position, but do not start the engine.

Using the Factory-Installed Key Fob

If your Dodge Durango came with a factory-installed key fob, you can use it to program a new one. Remove the key from the ignition and ensure all doors are closed.

2010 Dodge ram key fob
2010 Dodge ram key fob
How to Program a Transponder Key Without Original?
How to Program a Transponder Key Without Original?

Press and release the 'Lock' button on the factory key fob. Within five seconds, press and hold the 'Unlock' button for about 10 seconds, then release. Repeat this process twice more.

Programming the New Key Fob

Now, insert the new key fob's key into the ignition and turn it to the 'On' position. After about five seconds, turn the ignition back to the 'Off' position.

AD

Take the new key fob and, within five seconds of turning off the ignition, press and release the 'Lock' button twice. If you've done it correctly, you'll see the lock and unlock indicators on the new key fob flashing briefly.

Programming Without a Factory-Installed Key Fob

If your vehicle did not come with a factory-installed key fob, you can still program a new one using two working key fobs. Start by placing the two working key fobs side by side, with their remote heads facing up.

Remove the fob covers and locate the resin projecting points inside. These points serve as 'buttons' to simulate the 'Lock' and 'Unlock' functions.

AD

Preparing the Key Fobs for Programming

Press a toothpick, pencil lead, or any thin, non-conductive object onto the resin point that corresponds to the 'Lock' function on both key fobs simultaneously. Hold this position for about five seconds.

Release the pressure on the 'Lock' points, then simultaneously press and hold the 'Unlock' points for about 10 seconds. Release the pressure and, within five seconds, press and hold the 'Lock' points again for about 10 seconds.

Syncing the New Key Fob

Take the new key fob and mimic the locking and unlocking sequence you performed on the working key fobs, using a thin, non-conductive object to press the corresponding points on the new key fob's internal circuit.

AD

Once you've successfully programmed the new key fob, test it by pressing the 'Lock' and 'Unlock' buttons. If the Durango's locks respond accordingly, your new key fob is now properly programmed!

Congratulations on successfully programming a new key fob for your Dodge Durango. Keep this guide handy for future reference, and always ensure you have a spare programmed key fob in case of emergencies. Happy driving!

AD