how to program chevy cruze key without original

Program Your Own Key for Chevy Cruze: No Original Required

By Jessica Moore
AD

Losing the original key to your Chevy Cruze can be a hassle, but not to worry, programming a new key is possible. This guide will walk you through the steps on how to program a Chevy Cruze key without the original, ensuring you're back on the road in no time.

Before we dive in, ensure you have a new key cut in the same pattern as your original. Also, note that the programming process might differ slightly depending on your Cruze's model year. This guide focuses on 2011-2015 models, but the process is similar for other years.

Preparation and Understanding the Dashboard

Familiarize yourself with your Chevy Cruze's dashboard. You'll spend some time interacting with it during the programming process. Locate the following: ignition switch, Driver Information Center (DIC), and the power door unlock button.

AD
How to Program a Transponder Key Without Original?
How to Program a Transponder Key Without Original?
Save Money and DIY - How To Program A Key Fob For A 2011 to 2014 Chevrolet Cruze For ABSOLUTELY FREE
Save Money and DIY - How To Program A Key Fob For A 2011 to 2014 Chevrolet Cruze For ABSOLUTELY FREE
a person is holding a cell phone and pointing at it with their finger to the camera
a person is holding a cell phone and pointing at it with their finger to the camera

Gather your materials: new key, owner's manual (just in case), and a pen to mark the key's position during programming.

Programming the Key

Initial Setup

Start by inserting your new key into the ignition and turn it to the 'ON/RUN' position. Press and hold the power door unlock button. While still holding the button, press and release the power door lock button five times within ten seconds.

DIY Key Fob Programming – What Works & What Doesn’t
DIY Key Fob Programming – What Works & What Doesn’t
How To Program Chevy Keys - All The You Need to Know
How To Program Chevy Keys - All The You Need to Know

A message should appear on the DIC saying 'PIN CODE REGISTRATION'. If it doesn't, double-check your key's position and button presses, then try again. If you still encounter issues, consult your owner's manual.

Entering the PIN Code

Using the ignition switch, enter your vehicle's PIN code. This is a five-digit number, typically 12345 or 00000. If you're unsure, consult your owner's manual. Once entered, turn the ignition to the 'LOCK' position, then back to 'ON/RUN'.

AD

Chevrolet Cruze key programming sequence, don't worry; it's normal. Just wait for the indicated time before proceeding.

Calibrating the Key

Press and release the power door unlock button again. This time, use the ignition switch to turn the key from 'LOCK' to 'RUN', then back to 'LOCK' five times within ten seconds. The DIC should display 'DOOR UNLOCKED'.

Now, hold the key in the 'RUN' position for about eight seconds. You'll hear the locks cycling, indicating that the key has been programmed. Turn the ignition back to 'LOCK', then try your new key in the driver's door. It should unlock and lock when you press the power door lock/unlock button.

AD

Testing and Verifying

Confirm that all doors and the trunk can be locked and unlocked using your new key. Also, make sure the key works with the ignition and start/stop function as intended.

If your Chevy Cruze has keyless entry, program this feature next. Turn the ignition to the 'ON/RUN' position, then press and hold the power door unlock button for about two seconds. Press the lock/unlock button on your new key fob concurrently. Release both buttons when you hear the lock/unlock chimes. Try the key fob to ensure the keyless entry feature is working.

Congratulations! You've successfully programmed a new key for your Chevy Cruze without the original. Always keep your new key handy and consider programming additional keys if needed. Happy driving!

AD
AD