Program Philips Universal Remote No Code Search
Did you recently purchase a Philips universal remote but found that your model doesn't have a code search button? Don't despair. Programming a Philips universal remote without a code search button is still a straightforward process. This guide will walk you through the steps to program your remote, ensuring you can enjoy the convenience of a single remote for all your devices.
Before we dive into the process, it's essential to understand that Philips provides two types of universal remotes: those with a code search button and those without. This guide focuses on the latter. We'll use the Philips SRU432/16 remote as an example, but the process is similar for other Philips universal remotes without a code search button.
Preparing Your Devices and Remote
Before you begin, make sure you have the following ready:
- A Philips universal remote without a code search button
- A list of device manufacturer codes (you can find these online)
- The devices you want to control (like a TV, cable box, and soundbar)
Finding the Right Device Code
Without a code search button, you'll need to find the correct manufacturer code for your devices. Visit the Philips support website or use a universal remote code database to find the codes for your devices.
Once you have the codes, write them down or keep the website open for reference. Having the correct codes ensures your remote can reliably control your devices.
Understanding Your Remote's Layout
Familiarize yourself with your remote's layout. Locate the 'TV', 'VCR/DVD', and 'AUX' buttons. These will help you select the device you want to program. Also, note the 'SETUP' button, which you'll use to initiate the programming process.
For the Philips SRU432/16 remote, the 'SETUP' button is located at the top left corner, next to the light sensor. The 'TV', 'VCR/DVD', and 'AUX' buttons are along the top right side.
Programming Your Philips Universal Remote
Now that you're prepared, let's start programming your remote.
Entering Learning Mode
First, turn on the device you want to control. Then, press and hold the corresponding device button (e.g., 'TV' for your television) until the LED light blinks twice. This indicates that the remote is now in learning mode and ready to receive the device code.
Entering the Device Code
Using the number keys, enter the five-digit device code found earlier. For example, if your TV's code is 01051, enter these numbers on the remote's keypad.
After entering the code, press the device button again. The LED light will either remain on or blink once, indicating that the code has been accepted, and your remote is now programmed to control that device.
Testing the Connection
Before moving on to other devices, test the connection. Change the channel or perform another function on your remote to ensure it's working correctly. If the function works, proceed to the next device. If not, double-check that you entered the correct code and try again.
Programming Multiple Devices
Repeat the process outlined above for each device you want to control. For each new device, ensure you're selecting the correct device button (e.g., 'VCR/DVD' for a cable box) and entering the appropriate code.
Using Child Lock Function
If your remote has a child lock function, this is a good time to set it up. With several devices programmed, you may want to prevent unintended changes. Consult your remote's user manual for instructions on setting up the child lock function.
Congratulations! You've successfully programmed your Philips universal remote without a code search button. Enjoy the convenience of controlling all your devices with a single remote.