how to program a onn universal remote

Mastering Universal Control: How to Program Your ONN Remote

By Kevin Robinson
AD

Mastering the intricacies of your new ONN universal remote can significantly simplify your home entertainment experience. This user-friendly guide will walk you through the process of programming your ONN universal remote, allowing you to control multiple devices with a single, convenient remote.

Before we dive into the programming process, ensure that you have the necessary information about the devices you want to control. This typically includes the brand and model number, and in some cases, the device code. If you're unsure about the device code, don't worry—your ONN remote has a built-in learning function that can automatically pick up the code.

Understanding Your ONN Universal Remote

First, familiarize yourself with the layout of your ONN universal remote. The remote should have buttons dedicated to various functions, such as power, volume, channel navigation, and device control. These buttons might have universal symbols or brand-specific logos.

AD
Onn Universal Remote Codes: Program ONB13AV004 for 4 Devices
Onn Universal Remote Codes: Program ONB13AV004 for 4 Devices
Universal Remote Codes
Universal Remote Codes
Programming This ONN 6 Device Universal Remote to ANY Device!
Programming This ONN 6 Device Universal Remote to ANY Device!

Importantly, locate the 'SETUP' or 'PROGRAM' button. This is where the learning process begins. You'll use this button to instruct the remote to learn the commands from your other remotes.

Gathering Your Devices

Before programming, collect all the remotes you want to consolidate onto your ONN universal remote. Having them readily available will make the process smoother and less prone to errors.

UNIVERSAL REMOTE CODES
UNIVERSAL REMOTE CODES
Programming This ONN 4 Device Remote to YOUR Devices!
Programming This ONN 4 Device Remote to YOUR Devices!

Also, ensure that your devices are ready for programming. Some devices, like TVs or cable boxes, might need to be turned on. In other cases, you might need to adjust the device's IR (infrared) settings. Check your device's manual if you're unsure.

Identifying Your Devices

ONN universal remotes support a wide range of devices, from TVs and DVD players to cable boxes and streaming devices. To start programming, you'll need to identify the correct device on your ONN remote. This is usually done using the 'DEVICE' buttons along the top of the remote.

AD

For TVs, select the corresponding 'TV' button. For cable or satellite boxes, choose 'CV' (for Cable/Vsat). For audio devices like speakers or soundbars, select 'AUX'. For other devices, like Blu-ray players or streaming devices, choose 'AV' (for Audio/Video).

Programming Your ONN Universal Remote

Now that you're familiar with your remote and have gathered your devices, it's time to start programming. The process is largely the same for all devices, but the specific buttons you'll need to press might vary.

Remember, patience is key. Programming a universal remote can take some trial and error. If a device doesn't work right away, don't worry. Just keep trying different combinations until you find the one that works.

AD

Using the ONN Remote's Learning Function

The learning function on your ONN remote allows it to mimic the IR signals sent by your original remotes. This makes it easy to program devices without knowing their specific codes. To use this feature:

  1. Turn on the device you want to program.
  2. Point your original remote at the device and press the button you want to duplicate. Note that for some devices, you might need to press and hold the button for a few seconds.
  3. On your ONN remote, press and hold the 'SETUP' or 'PROGRAM' button until the corresponding device button (e.g., 'TV', 'CV', 'AUX', 'AV') starts to flash.
  4. Still holding the 'SETUP' or 'PROGRAM' button, point the original remote at the ONN remote and press the button you noted earlier.
  5. Release both remotes. If the learning was successful, the device button on your ONN remote should stay lit for a few seconds.

Manually Entering Device Codes

If your ONN remote doesn't learn the IR signal correctly, or if you prefer to use specific device codes, you can manually enter them. ONN provides a list of common device codes on their website. Here's how to manually program your remote:

  1. Turn on the device you want to program.
  2. On your ONN remote, press and hold the 'SETUP' or 'PROGRAM' button until the corresponding device button starts to flash.
  3. Enter the device code using the number buttons on the remote. If the code is incorrect, an accompanying error message will guide you to enter the correct one.
  4. Once the code is accepted, the remote will beep to confirm. Press the 'POWER' button to test the programming.

Testing Your ONN Remote

After programming, it's crucial to test your ONN remote to ensure it's working correctly. Try changing channels, adjusting the volume, or turning the device on and off to confirm everything works as expected.

AD

Remember, if a function doesn't work, try again with a different combination of buttons, or try reprogramming the device. Often, it's simply a matter of finding the right combination.

That's it! With a few simple steps, you've successfully programmed your ONN universal remote. Now, you can control your entire home entertainment system with just one remote. Happy viewing!

AD