how to program a fios remote

Program Your Fios Remote: A Step-by-Step Guide

By Anthony Thompson
AD

So, you've just set up your high-speed Verizon Fios? That's great! But hold on, what about programming your remote to ensure it works exactly how you want it to? Don't worry, it's not as complicated as it sounds. In this guide, we'll walk you through the process step by step. Let's dive in!

The Fios remote is a versatile tool, allowing you to control not just your TV, but also your Fios set-top box and even your sound system. But before we start, ensure you have the correct remote. It should be labeled 'Fios TV OneRemote'.

Preparing Your Remote

Before we start, make sure your remote has batteries. Sounds simple, but it's a crucial first step. The Fios TV OneRemote uses two AA batteries, which you can find at any local store or online.

AD
Universal Remote Codes
Universal Remote Codes
How to Program Remote Control without Manual - FiOS TV Phillips
How to Program Remote Control without Manual - FiOS TV Phillips
Fios TV Voice Remote FAQs | Fios Support
Fios TV Voice Remote FAQs | Fios Support

Once you've confirmed your remote is powered up, it's time to get started. Note that while we'll provide general steps, the exact process may vary slightly depending on the model of your remote and Fios equipment.

Syncing Your Remote

Before you can program your remote, you need to sync it with your Fios set-top box. Here's how:

Onn Universal Remote Codes: Program ONB13AV004 for 4 Devices
Onn Universal Remote Codes: Program ONB13AV004 for 4 Devices
How To Set Up A Universal Remote Control - Step By Step
How To Set Up A Universal Remote Control - Step By Step
  1. Ensure your Fios TV OneRemote is powered on.
  2. Press and hold the 'Returns' button on your Fios set-top box for about five seconds. The 'Info' light will start blinking.
  3. Now, point your remote at the set-top box and press and hold the 'TV Power' button until the 'Info' light on the set-top box stays on. This should take about two seconds.
  4. Congratulations! Your remote is now synced.

    Programming the VCR/Other Devices

    If you have other devices like a VCR, DVD player, or a sound system that you'd like to control with your Fios remote, you can program them in. Here's how:

    1. Turn on the device you want to program.
    2. Press the 'TV' button on your remote, followed by the desired device number (1-4).
    3. Enter the programming mode for your device:
    4. For most devices, you'll press and hold the 'Setup' button on the device until a light appears, then input the appropriate command on your remote.
    5. If it's a TV, press the 'TV' button on your remote to enter programming mode.

    Once you've entered the programming mode, input the code for your device. You can find these codes in the manual of your device or online. After you've entered the code, press the 'Power' button on your remote to test if it works. If it does, congratulate yourself, you've just programmed your remote!

AD