Revive Your Pressure Washer: Quick Guide to Priming the Pump
Have you recently noticed a decrease in pressure from your pressure washer? This could be due to a lack of maintenance or simply wear and tear over time. Thankfully, one of the first things you can check and likely fix yourself is the pressure washer pump. Priming the pump is a straightforward process that can help restore your pressure washer's former glory. Let's dive into the step-by-step guide on how to prime a pressure washer pump.
Before we begin, it's crucial to understand that this process requires some basic knowledge of your pressure washer's mechanics and safety precautions when handling water and electricity. Always ensure your pressure washer is turned off and unplugged during these steps to prevent any accidental electrocution.
Understanding Your Pressure Washer Pump
Pressure washer pumps are typically located at the heart of your pressure washer, near the motor. They come in various types, such as axial cam, wobble plate, and diaphragm pumps. For this guide, we'll primarily focus on axial cam pump priming, as it's the most common in residential pressure washers.
Your pump consists of a few main components: the pump housing, inlet and outlet valves, and the unloader valve. The inlet valve brings water into the pump, the outlet valve pushes water out at high pressure, and the unloader valve regulates pressure in the system. Understanding these components will help you diagnose and fix any future issues.
Preparation and Safety
Safety should always be your paramount concern when working on your pressure washer.
- Unplug your pressure washer from the power source to prevent electrocution.
- Release any built-up pressure in the pump and hoses by placing your trigger in the 'on' position and opening the spray gun slightly.
- Allow all components to cool down if you've recently used it, as they can get quite hot.
Now that you've ensured safety, let's move on to the priming process.
Priming Your Pressure Washer Pump
Priming your pressure washer pump involves filling the pump with water to prevent air locks and restore optimal pressure. Here's a simple procedure to do this:
- Find your pressure washer's manual for your specific model, as priming routines may vary slightly between brands and models. In most cases, you'll find a priming bulb, a manual primer, or a pressure gauge and hose attached to the pump.
- Fill your pressure washer's water reservoir to the appropriate level, usually marked on the tank.
- Attach the garden hose to your pressure washer and turn on the water supply.
For pumps with a priming bulb:
- Squeeze and release the priming bulb several times until water consistently flows through the bulb and into the pump. This indicates that you've filled the pump with water and removed any air locks.
For pumps with a manual primer:
- Turn the primer's handle or button several times until water flows through the inlet valve and into the pump. This process allows you to manually push water into the pump to remove air locks.
For pumps with a pressure gauge and hose:
- Connect the gauge and hose to the pump's unloader valve port, and close the valve on the hose.
- Open the valve slowly to release water into the pump, watching the gauge for the correct psi. Once you've reached the recommended psi, close the valve and disconnect the gauge and hose.
After priming, re-assemble your pressure washer, ensuring all components are securely fastened. Plug your pressure washer back in and test it by running some water through the system, either directly from the tank or through a connected hose.
Troubleshooting Common Issues
If you've followed these steps and still aren't achieving your desired pressure, there might be other issues at play.
First, check whether your pump is leaking. If so, it might be time for a replacement, as repairing pumps can be complex and costly. Always consult your user manual and contact the manufacturer if you're unsure about performing repairs.
Checking for Air Locks
Air locks can occur when air pockets form within the pump, preventing it from building up proper pressure. If you suspect an air lock, follow these steps to remove it:
- Disconnect your detergent intake hose from the pump and place a bucket underneath it.
- Squeeze the trigger gun to release any residual pressure.
- Shake the trigger gun and pump inlet valve area vigorously to help break up the air pocket.
- Reconnect the detergent intake hose and attempt to prime the pump again.
If your pressure washer still isn't performing optimally, consider checking other components, such as the inlet and outlet screens, unloader valves, and high-pressure hoses.
Regular maintenance is key to keeping your pressure washer in top shape. Make sure to inspect your pump for any leaks or damage after each use, and prime it when needed. With proper care, your pressure washer should serve you well for many years to come.