how to prime fuel system on series 60 detroit

How to Prime Fuel System on Series 60 Detroit Diesels

By John Miller
AD

Priming the fuel system on a Series 60 Detroit Diesel engine is a crucial maintenance task that ensures smooth operation and prevents potential malfunctions. Understanding the process and doing it correctly can save you time, money, and engine downtime. Here's a comprehensive guide on how to prime your Series 60 Detroit fuel system effectively and safely.

Before we dive into the step-by-step process, let's understand why priming the fuel system is important. Priming helps to purge air from the system, ensuring adequate fuel supply to the injection pumps and reducing wear and tear on engine components. It's particularly important after fuel filter changes, engine overhauls, or long-term storage.

Preparation and Safety Precautions

priming the fuel system should always be done with safety in mind. Here are some essential safety precautions:

AD
Detroit Diesel Service Manuals for Series 50, 60 & MBE Engines
Detroit Diesel Service Manuals for Series 50, 60 & MBE Engines
Figure 5-23.Diagram of typical Detroit diesel fuel system.
Figure 5-23.Diagram of typical Detroit diesel fuel system.
Client Challenge
Client Challenge
  • Ensure the engine and surrounding area are cool to prevent burns and fires.
  • Wear appropriate personal protective equipment (PPE), including gloves and safety glasses.
  • Have a fire extinguisher nearby to tackle any surprise fires.
  • Follow your engine's manufacturer guidelines for specific instructions.

Gathering Necessary Tools and Supplies

Priming a fuel system on a Series 60 Detroit engine requires minimal tools. Here's what you'll need:

  • Fuel (meeting the engine's specifications)
  • Fuel pump or manual priming pump
  • Rags or shop towels
  • catch pan
  • Fuel filter wrench (if replacing the fuel filter)

Draining and Preparing the Fuel System

Before priming, it's essential to drain the fuel system to remove any contaminated or old fuel. Here's how to do it:

the engine compartment diagram for an automobile
the engine compartment diagram for an automobile
How to build a fuel system that our MR2 won’t outgrow
How to build a fuel system that our MR2 won’t outgrow
  1. Locate the fuel drain fitting at the lowest point in your system, usually at the lift pump or the fuel passage to the transfer pump.
  2. Carefully loosen the fuel drain fitting using the appropriate wrench, allowing old fuel to drain into your catch pan.
  3. Once all visible fuel is out, tighten the drain fitting back up.
  4. Now, it's time to check your fuel pump and filter. Inspect them for any signs of damage or wear, and replace them if necessary.

Priming the Fuel System

Now that you've prepared your fuel system, it's time to prime it with fresh fuel. Here's how to do it safely and effectively:

Using a Fuel Pump or Priming Pump

Priming pumps are designed toEngland push fuel through the system at a controlled rate. Here's how to use one:

AD
  1. Connect the priming pump to the fuel system, ensuring compatibility with your fuel type (diesel, gasoline, etc.).
  2. Submerge the pump's intake in a container of fresh fuel.
  3. Locate the fuel elbow at the highest point in your system, usually at the entrance to the injection pumps. Loosen it using the appropriate wrench.
  4. Position your catch pan underneath the elbow to collect any spilled fuel.
  5. Operate the priming pump, pushing fresh fuel through the system until it begins to drip from the fuel elbow. This indicates that fuel has reached the high point in the system.
  6. Once fuel starts dripping, tighten the fuel elbow securely.
  7. Continue operating the pump, checking for leaks at all potential points, such as fuel injection lines, until fuel begins to exit the engine's vent valve. This is a sign that the system is full of fuel and purged of air.
  8. Allow the engine to sit for a few minutes to ensure all air bubbles have escaped.

Manual Priming Method

If you don't have a priming pump, you can manually prime your fuel system using a hand-operated fuel pump or a syringe:

  1. Use a funnel to carefully add fresh fuel to the fuel lift pump inlet.
  2. Operate the manual pump or syringe, pushing fuel through the system, just as you would with an electric priming pump.
  3. Follow the same steps as above, checking for leaks and ensuring fuel reaches the vent valve.

Post-Priming Checks and Procedures

After successfully priming your fuel system, there are a couple more steps to ensure optimal performance:

Starting and Testing the Engine

Now that your fuel system is primed and purged of air, you can test the engine:

AD
  1. Following your engine's usual starting procedure, crank the engine over. Do not attempt to start the engine immediately; you need to bleed any remaining air from the fuel lines.
  2. Allow the engine to crank for about 10 to 15 seconds. If you hear the fuel pump cycle, this is a good sign that air is being forced out of the system.
  3. Continue to crank the engine in 10- to 15-second intervals, allowing the engine to rest for about 30 seconds between attempts. This will help release any trapped air in the lines and ensure all injectors are properly primed.
  4. Once you've heard the fuel pump cycle a few times and the engine compression seems to improve, you can attempt to start the engine normally.

Inspecting the Engine for Leaks

After starting the engine, it's crucial to inspect the fuel system for any signs of leaks:

  • Look around the lift pump, transfer pump, fuel injection lines, and the engine's vent valve for any signs of fuel leakage.
  • Check for any visible fuel stains or condensation on any engine components. These could indicate potential fuel system issues.
  • Listen for unusual noises from the fuel pump or injectors, which could indicate air in the system or a leak.

Congratulations, you've successfully primed your Series 60 Detroit fuel system! Regular maintenance, like fuel system priming, is key to keeping your engine in peak condition. Always follow manufacturer guidelines and double-check any specifics regarding your engine model. Happy primings!

AD