how to prime coil

How to Prime Coil: Expert Tips and Tricks

By Daniel King
AD

Whether you're a seasoned vaper or just starting out, knowing how to prime your coil is a crucial aspect of maintaining your vaping device. Priming ensures that your coil is thoroughly soaked with e-liquid, preventing dry hits and enhancing flavor. In this guide, we'll walk you through the process step by step, making sure you get the most out of your vaping experience.

Before we dive into the process, remember that primed coils perform better and last longer than unprimed ones. Priming also ensures a more enjoyable experience, so it's a small effort that goes a long way. Now, let's get started.

Understanding Your Coil and Wick

To effectively prime your coil, it helps to understand what's happening inside. Your coil consists of a wick and a coil (duh!), with the wick's job being to transport e-liquid to the hot coil, where it vaporizes. When you prime your coil, you're essentially saturating the wick with e-liquid to prepare it for vaping.

AD
Easy Coil Pots
Easy Coil Pots
How to create basic Lakhovsky coils using different colours for different plants 🌱 | PeakD
How to create basic Lakhovsky coils using different colours for different plants 🌱 | PeakD
Comb Coil Unraveling Fix: How To Keep Your Coils Neat And Defined
Comb Coil Unraveling Fix: How To Keep Your Coils Neat And Defined

Different coils might require slightly different priming techniques, so always check your coil's specifications. Ceramic coils, for instance, are often pre-primed in a way that makes additional priming unnecessary. However, for standard cotton-based coils, the following methods should do the trick.

Priming with Drops

One of the simplest ways to prime your coil involves using a few drops of e-liquid. Here's how it's done:

a woman is holding some kind of thing in her hands while standing at a table
a woman is holding some kind of thing in her hands while standing at a table
Get defined curly hair with Brush Coiling
Get defined curly hair with Brush Coiling
  1. Drip and Wait: Gently drip a few drops of e-liquid onto the wicking holes at the side of your coil. Allow the coil to sit for a few minutes to permit the wick to absorb the liquid.
  2. Repeat: Repeat the process a few times, adding a drop or two at a time, until the wick is fully saturated. Be careful not to flood your coil, as this can lead to unnecessary leakage.

Once your coil is fully primed, allow it to sit for about 5-10 minutes to ensure proper wicking. Then, you're ready to vape!

Priming with a Syringe

For those who prefer a more controlled method, using a small piercing needle and a syringe allows for precise liquid delivery. Here's how to go about it:

AD
  1. Insert the Needle: Gently insert the needle into the wicking holes on the side of your coil. Be cautious not to push too hard and damage the coil or cotton.
  2. Squeeze Slowly: Slowly squeeze the syringe, allowing a small amount of e-liquid to fill the cotton. Stop when you feel resistance or when the cotton can't take any more.
  3. Repeat: Repeat the process on all wicking holes, ensuring that the cotton is evenly saturated with e-liquid.
  4. Allow to Rest: Once done, allow the coil to sit for 5-10 minutes before using.

This method ensures that the cotton is thoroughly primed and helps prevent leakage due to excessive wicking holes liquid.

Priming Before and After Rebuilding

Priming is a crucial step whenever you clean, replace, or rebuild your coil. However, it's important to note that the ideal timing varies:

Priming After Rebuilding

No matter how careful you are when rebuilding, it's likely that your newly installed coil will Include some small dry patches. To maximize performance and prevent dry hits, make sure to prime your coil after rebuilding.

AD

Use either of the above priming methods (drops or syringe) to ensure that the entire wick is thoroughly saturated with e-liquid. Allow the coil to sit for a few minutes before vaping, just to be safe.

Priming Before Rebuilding

Some vapers prefer to prime their coil before rebuilding. While this can help to saturate the wick and reduce the risk of dry hits, it's not always necessary. If you choose to prime, be careful not to leave the primed coil sitting around for too long, as this can cause leakage or dehumidification, impacting your coil's performance.

Instead, prime your coil just before installing it, and allow it to sit for only a few minutes before vaping.

AD

There you have it - a comprehensive guide to help you master the art of priming your coil. Remember, a properly primed coil ensures a more enjoyable vaping experience, better coil life, and improved flavor. So, don't skimp on the priming - it's a small effort that makes a big difference. Happy vaping!

AD