how to prime a beckett oil burner

How to Prime a Beckett Oil Burner: Expert Steps

By David Martinez
AD

Winter's chill can be brutal, especially when you rely on an oil burner to keep your home warm. A Beckett oil burner is a top pick for many homeowners due to its efficiency and reliability. However, like any other heating system, it requires regular maintenance to ensure optimal performance. Priming your Beckett oil burner is a crucial aspect of this maintenance, and we're here to guide you through the process.

Before we dive into the actual priming process, let's first understand what it entails. Priming your oil burner involves preparing the system to ignite the oil when needed. This step is essential to prevent air from entering the fuel line, which could otherwise lead to burner failure. Now that we've painted a clear picture, let's get down to business.

Gathering Your Tools

Before you embark on this task, ensure you have the right tools at your disposal. The process requires minimal equipment, which is great news! Here's what you'll need:

AD
How To Prime A Beckett Oil Burner - Hunker
How To Prime A Beckett Oil Burner - Hunker
Beckett oil burner training series # 5
Beckett oil burner training series # 5
How to make an oil burner ❤️‍🔥 #ceramics #pottery #slabbuilt #handmade #clay #diy #homedecor
How to make an oil burner ❤️‍🔥 #ceramics #pottery #slabbuilt #handmade #clay #diy #homedecor
  • An oil can or funnel
  • Heating oil (the same type you use in your burner)
  • Mechanic's gloves
  • Safety glasses
  • Rags or towels (for cleaning)

Preparation: Safety First

Safety should always be your top priority when dealing with heating systems. Therefore, before you start, ensure the power to your burner is shut off. The reset button should be in the 'reset' position, and the burner should be cool to the touch. If it's not, wait for it to cool down completely before proceeding. Also, put on your safety glasses to protect your eyes from any oil splashes.

Next, locate the oil supply line connected to your burner. It's typically a clear or translucent tube that leads from the oil tank to the burner. At the burner end, you should see a primer bulb, which looks like a small, rubber squeeze bulb. If you don't see one, you may need to consult your owner's manual to locate it.

The manufacturer doesn't want you to know this! Saving money
The manufacturer doesn't want you to know this! Saving money
Used Oil Burner (Making process).
Used Oil Burner (Making process).

The Priming Process

Now that you're equipped and have identified the primer bulb, you're ready to prime your Beckett oil burner. The process is straightforward and involves four main steps. Let's break them down:

Step 1: Squeeze the Primer Bulb

Gently squeeze the primer bulb several times (around four to five times should suffice). This action forces oil from the oil tank into the burner.

AD

After each squeeze, pause for a moment to allow the oil to settle. If the bulb is difficult to squeeze, it might be too full. In this case, release some of the oil by squeezing it a few times until it's easy to compress again.

Step 2: Inspect the Burner for Leaks

After priming, check for any signs of oil leaks around the burner. If you find any, wipe them clean with a rag or towel. If the leak persists, you may need to replace the troubling component.

Also, look for signs of burnt oil around the nozzle. A black, sooty residue indicates that the oil is not burning cleanly. If you find such deposits, cleaning the nozzle might be necessary (more on this in a moment).

AD

Step 3: Re-test the Prime

Now that you've primed the system and checked for leaks, it's time to re-test the prime. This step ensures that the oil line is free from air and fully primed. To do this, squeeze the primer bulb again, but this time, count how many squeezes it takes until oil appears at the burner nozzle.

If oil appears after two or three squeezes, your system is correctly primed. If it takes more than three squeezes, repeat the process until it primes correctly. If the primer bulb doesn't release any oil despite your efforts, there might be an airlock in the system. In this case, you'll need to bleed the air from the fuel line (more on this later).

Step 4: Clean the Nozzle (If Necessary)

If you noticed signs of burnt oil earlier, now's the time to clean the nozzle. A dirty nozzle can cause combustion issues, leading to poor heating performance and increased fuel consumption. Here's how to clean it:

AD
  1. Using a suitable solvent (like kerosene or denatured alcohol), soak a rag or cleaning cloth.
  2. Wrap the soaked cloth around the nozzle, ensuring the entire surface is covered.
  3. Allow the cloth to sit for about 15-20 minutes to fully dissolve the carbon buildup.
  4. After this time, scrub the nozzle gently with a wire brush to remove any remaining residue.
  5. Wipe the nozzle clean with a dry cloth, and you're done!

Dealing with Airlocks

Air can sometimes find its way into the fuel line, causing an airlock. If you're having trouble priming your system, or if oil doesn't reach the burner nozzle, you might have an airlock. The good news is, you can bleed the air from the fuel line. Here's how:

Locating the Air Bleed Screw

First, locate the air bleed screw on your oil burner. This tiny screw is usually found near the burner nozzle, typically marked with an 'Air' or 'Bleed' label. If you can't find it, consult your owner's manual for guidance.

Bleeding the Air

Once you've found the air bleed screw, use an appropriately-sized Allen wrench to loosen it gradually. As you do this, you should hear air escaping from the line. If oil starts to flow instead, tighten the screw slightly to stop the flow. Once the air has been bled, tighten the screw firmly, and you're good to go.

Regularly priming your Beckett oil burner is crucial for maintaining its efficiency and longevity. If you're unsure about any part of the process or encounter any issues, don't hesitate to consult a professional. Keeping your home warm and safe is always the top priority. Stay cozy!

AD