how to plasti dip car

Mastering Plasti Dip: Ultimate Guide to Dipping Your Car

By Jessica Lee
AD

Plasti Dip, a revolutionary product in the automotive world, allows you to temporarily change the appearance of your car's exterior. Unlike permanent wraps or paint jobs, Plasti Dip is removable, making it a great solution for customizing your vehicle without long-term commitments. Here's a comprehensive guide on how to Plasti Dip your car, ensuring a professional, long-lasting finish.

Before you start, ensure you have everything you need. Gather Plasti Dip spray, activator, reducer, a good quality paintbrush for edges, 2000-grit sandpaper, isopropyl alcohol, and protective gear, including gloves and goggles.

Preparation: Readying Your Car for Plasti Dip

The key to a successful Plasti Dip application is thorough preparation. Begin by choosing a warm, dry day with minimal wind to ensure the best outcome.

AD
What is plasti dip used for - and how to use it?
What is plasti dip used for - and how to use it?
SharpHumor
SharpHumor
PlastiDip a WHOLE CAR - How-to by DipYourCar.com
PlastiDip a WHOLE CAR - How-to by DipYourCar.com

Wash your car meticulously to remove any wax, residue, or grease. Use a wax and grease remover if necessary. Allow it to dry completely before proceeding.

Sand and Degrease

Lightly sand the surfaces you plan to dip with 2000-grit sandpaper. This helps the Plasti Dip adhere better and creates a more even texture. Wipe away any dust with a damp cloth.

How To Plasti Dip Emblems/Badges on Your Car | Step By Step Guide
How To Plasti Dip Emblems/Badges on Your Car | Step By Step Guide
Plasti Dip Removal Comparison - Which is best?
Plasti Dip Removal Comparison - Which is best?

Apply an isopropyl alcohol wipe to ensure the surface is grease-free. Allow it to dry for a few minutes.

Masking and Protecting

Use painter's tape and craft paper to mask off areas you don't want to cover, such as windows, trim, and emblems. Be extra careful around edges to avoid drips.

AD

Apply a thin layer of soapy water to protected areas to help resist any accidental overspray.

Applying Plasti Dip: The Spraying Process

Your car is now prepared for the Plasti Dip application. Remember, patience is key. The process involves multiple thin coats for the best results.

Start with the activator. Lightly spray it onto the surface in a thin, even layer, working in small sections at a time. Wait for 10-15 minutes to allow it to tack off.

AD

Spraying the Plasti Dip

Shake the Plasti Dip can well before using. Begin spraying in short, even strokes, holding the can 6-8 inches from the surface. Apply a thin, even coat, ensuring you don't leave any bare spots. Work in sections, maintaining a 'wet edge' as you go.

Wait for 30-45 minutes before applying the next coat. Apply a total of 3-5 coats, depending on the desired thickness and color intensity. Remember, more isn't always better; multiple thin coats create a smoother, more even finish.

Using Reducer for Fine-Tuning

If you find that your edges are too thick or need smoothing, use the reducer to thin the Plasti Dip. Lightly spray it onto a soft cloth and dab at the edges until smooth. Allow it to dry for 30 minutes before assessing.

AD

Once you're satisfied with the finish, wait at least 24 hours before washing or waxing your car. This allows the Plasti Dip to fully cure and achieve its maximum durability.

Maintaining and Removing Plasti Dip

Proper maintenance extends the lifespan of your Plasti Dip. Keep your car clean, avoiding harsh chemicals and automotive wax. Use a mild car wash liquid and a soft cloth or sponge.

When the time comes to remove the Plasti Dip, use a heat gun or hair dryer to soften the edges. Gently peel it off, using a scraper if necessary. any remaining residue can be removed with rubbing alcohol or nail polish remover.

Congratulations, you've successfully Plasti Dipped your car! Enjoy your temporary custom ride, knowing you can revert it back to its original appearance whenever you wish. Happy customizing!

AD