how to plaster drywall

Mastering Drywall Plastering: Step-by-Step Guide

By Steven Lopez
AD

Embarking on a home improvement project, such as plastering drywall, may seem daunting, but with the right knowledge and tools, you'll be well on your way to transforming your space. This comprehensive guide walks you through the process, from gathering materials to applying the final touches. Let's dive in!

First, let's ensure you have the right tools and materials. You'll need drywallmud, drywall screws, drywall tapping knives (12" and 6"), joint tape, joint compound, sandpaper (150- and 220-grit), a drywall saw, utility knife, and a “scoop-and-squeeze” hawk. Gathering these will set you up for success.

Preparing the Drywall

Begin by inspecting your drywall panels for any damages or defects. You may need to cut out damaged sections and replace them. Use a drywall saw to create precise cuts, and secure the new piece with drywall screws spaced about 12" apart.

AD
the before and after shots of a kitchen remodel with white paint on the walls
the before and after shots of a kitchen remodel with white paint on the walls
Drywall Vs. Plaster (Differences, Benefits, Pro’s, Con’s)
Drywall Vs. Plaster (Differences, Benefits, Pro’s, Con’s)
Transform Your Walls: Easy Plastering DIY Guide for Beginners
Transform Your Walls: Easy Plastering DIY Guide for Beginners

Once your drywall is secure, it's time to prepare the seams for taping. Use a straight edge and a utility knife to score the paper covering the seam's backing, creating neat, straight notches that will allow your joint tape to adhere better. This step is crucial for a smooth, professional-looking finish.

Applying Joint Tape

Drag a bead of joint compound along the seam using your 6" taping knife, applying enough to completely cover the seam and extend about 2" on either side. Immediately press the joint tape into the compound, pressing firmly to ensure it adheres to the drywall.

Learn How to DIY Plaster - a Beginner's Complete Guide
Learn How to DIY Plaster - a Beginner's Complete Guide
How NOT to tape drywall
How NOT to tape drywall

Once the tape is applied, use your 12" taping knife to carefully smooth out any excess compound and press the tape firmly into place. This step requires a gentle touch to avoid tearing the tape, so proceed slowly and patiently.

Applying Joint Compound

Using your 12" taping knife, apply a thin layer of joint compound over the tape, feathering the edges to create a smooth transition from the taped seam to the surrounding drywall. This initial layer, known as the "first coat," serves to embed the tape and create a receptive surface for the next layer.

AD

Allow the first coat to dry completely, usually 24 hours. Use this time to inspect your work and ensure there are no gaps or imperfections. Once dried, lightly sand the surface using 150-grit sandpaper to smooth out any bumps or ridges. Wipe away any dust with a damp cloth before proceeding.

Finishing the Joints

Now that the first coat has been applied and sanded, it's time to apply the second coat. Using your 12" taping knife, apply a wider layer of joint compound, feathering the edges to about 12" on either side of the seam. This layer, known as the "second coat," helps to build up the seam and create a smooth, flush surface.

Allow the second coat to dry, usually around 24 hours. Inspect the surface for any imperfections, and once satisfied, lightly sand the surface using 220-grit sandpaper to ensure a smooth, ultra-smooth finish. Wipe away any dust, and your drywall is ready for priming and painting.

AD

Congratulations! You've successfully plastered your drywall, creating a smooth, professional-looking surface ready for painting or wallpapering. Embrace the pride of a job well done, and look forward to your next home improvement challenge. Happy DIY-ing!

AD