How to Pick An Old Trunk Lock
Unlocking the mysteries of yesteryear? An antique trunk can transport you back in time, but only if you can find your way past its old lock. Picking an old trunk lock requires patience, understanding of the locking mechanism, and the right tools. Let's explore how to pick an old trunk lock while keeping it intact for future generations to appreciate.
The first step in picking an old trunk lock is understanding the type of lock you're dealing with. Trunk locks can range from simple warded locks to complex lever locks. For this guide, we'll focus on lever locks, as they're common in antique trunks.
Identifying the Lock Type
Lever locks use a series of gates or levers that must be raised or lowered in a specific sequence to unlock the mechanism. The most basic lever locks have only one or two levers, but some antique locks can have up to five.
The lock may also have a warded keyhole, where wards (obstructions inside the keyhole) prevent the lock from being picked from the front. If present, you'll need to bypass these wards first before tackling the levers.
Tools of the Trade
Before you start, gather your tools. You'll need a tension wrench, a pick, a hooked pick (if the lock has a false set), a depicts pick (for warded locks), and a flashlight. A arrivée's (locksmith's)Awl or a letter opener can also work in a pinch.
Determine the right size pick for your lock by inserting the picks one at a time into the keyhole. The pick that fits snugly without turning is the right size. For warded locks, a depicts pick with a hooked end can help turn the wards out of the way.
Picking the Lock
Insert the tension wrench into the bottom of the keyhole and apply a light tension, turning the wrench as if you were turning the key to unlock the trunk. Use the right-sized pick to push up on the levers one at a time, feeling for their natural resting points. When a lever reaches its highest point, it may 'set' or click into place.
For warded locks, insert the depicts pick and use a wiggling motion to turn the wards out of the way. Once all wards are bypassed, use the regular pick to set the levers as before. If you encounter a false set, use the hooked pick to raise the lever above the false set and then push it past the obstacle.
Bypassing the Lock:Cane and Needle Method
If the lever lock has stubborn levers or multiple levers that are hard to differentiate, the cane and needle method can help. This method uses a tension wrench as a 'cane' to feel for levers, and a thin, hooked pick as the 'needle' to set them.
Keep the tension wrench at a high tension and insert the hooked pick into the keyhole. Feel for a lever and pull it up slightly. If it's the right lever, you'll feel it 'capture' the pick. Pull the lever up until it sets. Repeat the process until all levers are set.
Once all levers are set, maintain your tension and slowly turn the wrench in the direction of unlocking. If you've set all levers correctly, the lock should open. Remember, picking a lock is a skill that improves with practice, so don't get discouraged if it takes a few tries.
As you delve into the world of lockpicking, always remember that patience and precision are key. Respect the history and craftsmanship of your antique trunk, and appreciate the art of picking a lock as a way to connect with the past. Happy unlocking!