how to pair hunter douglas remote

Hunter Douglas Remote Pairing Made Easy

By Robert White
AD

Pairing Hunter Douglas window treatments with remote controls is a convenient way to enjoy your window coverings without leaving your seat. With a simple setup process, you can.Let's delve into how to pair a Hunter Douglas remote with your window treatments.

Gather Required Items

Before you start, make sure you have the following items:

  • A Hunter Douglas PowerView or Platinum remote
  • Window treatments compatible with the remote (Motorized or battery-operated)
  • The PowerView Hub or repeater (for systems with multiple window treatments)

Prepare Your Window Treatments

The first step is to check that your window treatments are compatible with the remote and properly installed. All Hunter Douglas motorized window treatments are compatible, while battery-operated units may vary. You can verify this on Hunter Douglas' official website.

AD
How to Pair a Pebble Remote | Hunter Douglas (Gen 2) Powerview Shade | A Shade Above
How to Pair a Pebble Remote | Hunter Douglas (Gen 2) Powerview Shade | A Shade Above
a person holding an mp3 player in their hand
a person holding an mp3 player in their hand
Hunter Douglas Window Treatments Design Guide
Hunter Douglas Window Treatments Design Guide

For motorized treatments, ensure they are correctly installed and receive power. Battery-operated units should have fresh batteries to guarantee proper functioning.

Pairing with a PowerView Hub

Using a PowerView Hub or repeater allows you to manage multiple window treatments in one system. Here's how to pair them:

Which Hunter Douglas Blinds Are Right for You?
Which Hunter Douglas Blinds Are Right for You?
Hunter Douglas Window Motorization
Hunter Douglas Window Motorization

Connect the Hub

If you haven't already, connect your PowerView Hub to your home's Wi-Fi network. Follow the instructions in the Hunter Douglas app or the PowerView Hub user manual to complete this process.

Once connected, the Hub will indicate a flashing light. Proceed to the next step.

AD

Add Scenes

In the Hunter Douglas app, create and name scenes for each window treatment or group of treatments you want to control. Tap on '+' to add a new scene, select 'Manual Control' and then 'Add Device.'

Press and release the 'Program' button on the remote. Within 30 seconds, press and hold down the button corresponding to the scene you just created. The remote should flash, indicating a successful pairing. Repeat this process for each scene.

Pairing without a PowerView Hub

If you're pairing only one window treatment, follow these steps:

AD

Turn on Your Window Treatment

Start by turning on the motorized or battery-operated window treatment you want to pair. This will initialize the pairing mode.

For motorized treatments, press the 'up' or 'down' button to start the motor. For battery-operated units, perform a lift/lower cycle.

Pair the Remote

Press and release the 'Program' button on the remote. Within 30 seconds, press and hold down the button corresponding to the channel you want to pair (1-5). The remote should flash, indicating a successful pairing.

AD

Repeat this process to pair more window treatments. You can have up to five treatments paired with a single remote.

Now, you can enjoy your Hunter Douglas window treatments with the convenience of a remote control. If you encounter any issues, don't hesitate to contact Hunter Douglas' customer support or refer to their detailed user manuals for troubleshooting advice.

AD