how to operate a skid steer bobcat

Mastering Bobcat Skid Steer Operation: A Step-by-Step Guide

By Rachel Martin
AD

Operating a skid steer loader, often affectionately called a "bobcat," is a necessary skill for anyone involved in construction, landscaping, or farming. These versatile machines can lift and move heavy loads, dig, and perform various other tasks, making them invaluable tools on work sites and in yards. Here's a comprehensive guide to help you master the basics of skid steer operation.

Before you start, familiarize yourself with the machine's layout. Skid steers typically have a bucket or attachment in the front, a cab in the middle, and two sets of wheels at the rear. The operator's controls, usually located on two armrests, include levers, pedals, and a steering wheel or joystick. Always adhere to safety guidelines and wear appropriate personal protective gear when operating a skid steer bobcat.

Understanding the Controls

Each skid steer model has slightly different controls, but this section will guide you through a typical setup found on most machines.

AD
How to Operate a Bobcat // Skid Steer Training
How to Operate a Bobcat // Skid Steer Training
Bobcat Troubleshooting Manual: Expert Tips
Bobcat Troubleshooting Manual: Expert Tips
How to Run a Bobcat Loader
How to Run a Bobcat Loader

Located on the right armrest, you'll find the lift, lower, and tilt controls. The lift lever raises the bucket or attachment, the lower lever does the opposite, and the tilt lever adjusts the angle of the bucket or attachment. On the left armrest, you'll generally find the auxiliary hydraulic functions, which operate any attached tools or machinery.

Lever Control Basics

Skid steers usually operate on a push-pull lever system. To move the machine forward, push the lever away from you. To reverse, pull it towards you. The further you push or pull the lever, the faster the machine moves.

Bobcat T770 Skid Steer Loader Service Manual December 2017 Edition
Bobcat T770 Skid Steer Loader Service Manual December 2017 Edition
How to Operate a Skid Steer (2020) Pre-Op to Shut Down| Skid Steer Loader Training
How to Operate a Skid Steer (2020) Pre-Op to Shut Down| Skid Steer Loader Training

To turn smoothly, use a combination of lever movement and steering with the wheels. For example, to turn left, slightly push the left lever forward and pull the right lever slightly towards you. This drives the left set of wheels forward and the right set backward, making the machine turn.

Hydraulic System Overview

The machine's hydraulic system powers the bucket and attachments, as well as any auxiliary functions. Understanding how the hydraulic system works is crucial to operating a skid steer bobcat safely and effectively.

AD

With any hydraulic-powered tool or machine, always ensure that the tool is fully under load before lowering it to the ground. If you lower a heavy load too quickly, it can cause the machine to tip. Additionally, never attempt to raise or lower heavy loads while moving the machine. Always wait for it to come to a complete stop before operating the loader arms.

Skid Steer Operation Essentials

Now that you're familiar with the controls, let's discuss some essential operating techniques for mastering a skid steer bobcat.

First, always begin by driving the machine straight forward or backward. Once you've built up some momentum, you can turn and maneuver. This helps keep the machine stable and minimizes the risk of tipping.

AD

Driving Techniques

Skid steers are mighty machines, but they're sensitive to uneven terrain. Always drive straight up or down slopes, never diagonal. When driving in reverse, keep an eye on your surroundings for obstacles, as your visibility may be limited.

When using the bucket or an attachment, remember that your visibility will be further obstructed. Always keep an eye on the loader arms and your surroundings to avoid any accidents. If you need a clear line of sight, get out of the cab and operate the loader remotely, if possible.

Safe Lifting and Moving Techniques

Before lifting any material, ensure that you have a clear path and enough space to move the load safely. Always lift material from its center of gravity to maintain stability. Try to keep the load balanced evenly in the bucket.

AD

When moving loads, ensure the machine's stability. Never lift or move loads over people, vehicles, or power lines. Always try to keep the load balanced and make sure it's secure before transporting it.

Operating a skid steer bobcat is a skill that takes time and practice to master. Always prioritize safety by following proper procedures, wearing appropriate gear, and maintaining a clear line of sight when lifting and moving loads. With practice, you'll soon be a pro at operating these versatile machines.

AD