How to Open Thompson's Water Seal
The Thompson's Water Seal, an iconic product in the home improvement realm, boasts a versatile waterproofing solution for your decks, foundations, and basements. Despite its user-friendly tagline, "No Nonsense, No Mess, No Stress," opening the product can pose some challenges for first-time users. This guide walks you through the process, demystifying it, and ensuring a smooth start to your waterproofing project.
First, ensure you have the right Thompson's Water Seal product for your specific needs. The brand offers variations like Thompson's WaterSeal High Solids, Thompson's WaterSeal Natural Wood Protector, and Thompson's WaterSeal Avec, each designed for different surfaces and conditions. Selecting the incorrect product may lead to an ineffective waterproofing process.
Preparation Before Applying Thompson's Water Seal
Before you uncork the Thompson's WaterSeal bottle, a few vital steps ensure a successful application and extend your waterproofing's lifespan.
Inspect and Clean the Surface: Thoroughly examine the surface to be treated. Remove any dirt, mildew, or loose paint using a pressure washer, wire brush, or scraper. Allow the surface to dry completely before moving to the next step.
Sand and Prime (For Impermeable Surfaces)
Impermeable surfaces like power-washed concrete, brick, or stucco require sanding to create a profile for the water seal to bond with. Use a handheld orbital sander or a disk sander, depending on the surface's size.
After sanding, remove the dust using a brush or compressed air. Apply a coat of Thompson's WaterSeal Waterproofing Primer. This step is crucial to creating a strong bonding surface for the water seal.
Moisture Test (For Concrete Basements)
For concrete basement walls, perform a moisture test before application. Apply a square of plastic sheeting to a small area of the wall, and weigh down the edges. Leave it for 24 hours, then remove it. If you see moisture, wait for the wall to dry completely before proceeding.
Suppose you detect moisture behind the plastic. In that case, you may need a more specialized solution like an epoxy-based waterproofing system before applying Thompson's Water Seal, as watersealants are not designed to keep water out from the inside.
Opening and Applying Thompson's Water Seal
With your surface prepared, you're now ready to open and apply the Thompson's WaterSeal. The application process is relatively straightforward, but taking the correct steps ensures the best possible outcome.
The Thompson's Water Seal bottle comes with a twist-off cap, making it easy to open. However, ensure you're working in a well-ventilated area or wear a respirator to avoid breathing in paint fumes.
Mixing the Water Seal
For some Thompson's WaterSeal products, like the High Solids variety, mixing is required. Before opening, shake the can vigorously to ensure the contents are well combined. Stir the water seal mixture gently using a clean paint stirrer or a paint can attachment for an electric drill sponsored briefly to mix thoroughly.
Be cautious not to introduce air into the mixture or create excessive foam. These can negatively impact the water seal's performance and application.
Applying the Water Seal
Using a pump-up garden sprayer, a paintbrush, or a paint roller, apply the Thompson's WaterSeal evenly and smoothly to the prepared surface. Apply the water seal along the grain of the wood or in ahtaccessseeated pattern to ensure uniform coverage.
It's essential to maintain a consistent wet edge while applying the water seal to prevent lap marks. Applying the water seal in the recommended coats ensures optimal protection. Typically, you'll need to apply one to two coats, depending on the surface type and the Thompson's WaterSeal product you're using.
After the final coat, allow the surface to dry for the recommended period before it's exposed to rain, snow, or other moisture. This waiting period ensures the Thompson's WaterSeal has adequately bonded with the surface and provides optimal protection.
Embarking on a waterproofing project with Thompson's Water Seal doesn't have to be daunting. With the correct preparation, a can-do attitude, and a bit of patience, you can successfully open and apply the water seal, adding years to your deck's or basement's lifespan. Happy waterproofing!