Ford Ranger Tailgate Tune-Up: Opening a Broken Handle
Picture this: You're eager to load up your Ford Ranger for a weekend adventure, but when you reach for the tailgate handle, it refuses to cooperate. Don't let a broken handle dampen your spirits. Let's walk through how to open your Ford Ranger's tailgate with a broken handle, and explore some temporary solutions until you can fix it properly.
Before we dive in, it's crucial to prioritize safety. If the handle is broken off or jagged, wear gloves to protect your hands, and be cautious when attempting to open the tailgate to avoid injury.
Understanding Your Ford Ranger Tailgate Mechanism
The first step is understanding how your tailgate works. Ford Rangers use a strut-assisted mechanism to make opening and closing the tailgate easier. The handle you usually use merely releases this mechanism, allowing the tailgate to drop or lift. With a broken handle, our goal is to bypass this mechanism.
A quick glance under the tailgate may reveal a cable running into the vehicle. This cable is connected to the handle and helps release the strut when pulled. In many cases, you can manipulate this cable to open the tailgate without the handle.
Locating the Cable Under the Tailgate
To access the cable, you'll need to get under the tailgate. If you're not comfortable doing this yourself, consider getting help from a friend or a professional. Once you're underneath, locate the cable that runs into the tailgate. It might be covered by a plastic boot for protection.
You might need a flashlight to clearly see the cable. If it's embedded in the tailgate, you might have to remove it. But don't worry, most of these are snaps or clips, not permanent fixtures. You can often reattach them later.
Manipulating the Cable to Open the Tailgate
Once you've located the cable, carefully manipulate it with your hand or a suitable tool. You're trying to mimic the action the handle would take - pulling the cable to release the strut. Don't force it. A little patience and a gentle touch should do the trick.
If you can't reach or manipulate the cable, another method is to use a coat hanger or a thin, flexible rod. Straighten the hangar or rod, then carefully insert it into the tailgate mechanism. Once you feel resistance, gently pull to release the strut.
Temporary Fixes: How to Secure Your Tailgate Until Repair
Opening your tailgate without a handle is a workaround, not a fix. You'll need to repair or replace your handle to ensure your tailgate remains secure. Until then, consider these temporary fixes:
Tape or Binder Clips
A roll of duct tape or a handful of binder clips can provide a quick, albeit temporary, solution. Use tape to secure the tailgate in the open position. For a bit more strength, use a combination of tape and binder clips. Just remember to close the tailgate when you're not using it.
Alternatively, you can use a bungee cord or a rope to secure the tailgate. Simply loop it around the tailgate and attach it to a secure point on your Ford Ranger. Make sure it's tight enough to keep the tailgate closed, but not so tight it damages your vehicle.
Professional Repair or Replacement
The best solution is to have your Ford Ranger's tailgate handle repaired or replaced. This might involve taking the vehicle to a professional or buying a replacement handle and installing it yourself.
Before attempting a DIY fix, consult your repair manual or contact a professional mechanic. They can guide you through the process and ensure your tailgate remains secure and functional.
And there you have it. With a bit of patience and the right know-how, you can open your Ford Ranger's tailgate even with a broken handle. Always prioritize safety and consider professional help if anything seems beyond your skill level. Happy adventuring!