how to open mustang trunk with dead battery

Open Dead Mustang Trunk: No Battery? No Worries

By Steven Jones
AD

Ever found yourself in a situation where your Mustang's battery is dead, but you urgently need to access the trunk? It can be frustrating, but don't worry, you're not out of luck yet. There are a few methods you can try to open your Mustang's trunk even when the battery is dead. Let's explore these solutions step by step.

Before we dive in, remember that these methods are temporary fixes. If your battery is truly dead, it's crucial to replace it as soon as possible for your vehicle's safety and proper functioning.

Manual Trunk Release

The first method we'll discuss involves physically opening the trunk from the inside.

AD
Trunk Trick: Move Your Battery Out Back for Better Traction, Speed, and Handling
Trunk Trick: Move Your Battery Out Back for Better Traction, Speed, and Handling
3 hidden functions of your car trunk #skills #car #mechanic #carrepair #cartrunk #drivingtips
3 hidden functions of your car trunk #skills #car #mechanic #carrepair #cartrunk #drivingtips
Ryan Hargett Transformed His Low-Mile Street Mustang Into A 7-Second Drag Week Dream Machine
Ryan Hargett Transformed His Low-Mile Street Mustang Into A 7-Second Drag Week Dream Machine

Here's a step-by-step guide:

Step 1: Access the Back Seat

Start by opening the driver's door (if it's not locked), then climb inside without turning the ignition on.

How to Finish Off Your 1967-1968 Mustang’s Trunk
How to Finish Off Your 1967-1968 Mustang’s Trunk
a man standing next to a car with the hood open and an engine in front of him
a man standing next to a car with the hood open and an engine in front of him

Notably, this method only works on Mustangs without keyless entry or those with a mechanical key.

Step 2: Locate the Trunk Release Handle

Look for a handle near the top of the rear seatback. It's usually located on the driver's side, but positions may vary slightly depending on the model year.

AD

Step 3: Pull the Handle

Pull the handle up firmly and steadily. If you've found the correct handle and it's in good condition, the trunk should unlatch and open.

Using a Coat Hanger or Slim jim

If the manual trunk release doesn't work or you're dealing with an automatic trunk latch, you might need to use a coat hanger or a slim jim. These tools help you pull the trunk release cable from outside the vehicle.

Remember, this method should only be used as a last resort. Unauthorized use of a coat hanger or slim jim could potentially damage the vehicle's interior or cause injuries.

AD

Prepare Your Tool

Straighten out the coat hanger or use a pre-made slim jim. Both tools should be long enough to reach the trunk release cable, usually found near the bottom of the trunk area.

Locate and Pull the Trunk Release Cable

Insert the coat hanger or slim jim through the weatherstrip or any small gaps around the trunk lid, then feel for the release cable. Once found, carefully pull the cable to unlatch the trunk.

Preventive Measures

It's always wisest to prevent these situations from happening. Here are a few tips:

AD

Regular Battery Maintenance

Make sure to regularly test your battery's voltage and maintain it properly. If it's old or weak, consider replacing it before it completely dies.

Keep Your Doors Unlocked

If your Mustang's battery dies, and the doors are unlocked, you can still access the vehicle using the method mentioned in the first main topic. However, keep in mind that leaving your doors unlocked can pose security risks. So, weigh the pros and cons before deciding.

In a bind, you should now be able to open your Mustang's trunk even with a dead battery. However, always prioritize safety and preventative maintenance to avoid these situations. Happy driving!

AD