how to open gopro waterproof case

How to Open GoPro Waterproof Case: Step-by-Step Guide

By Richard Allen
AD

Imagine you're at the beach, eager to capture stunning underwater footage with your GoPro. Before you dive in, it's crucial to ensure your GoPro is snugly protected in its waterproof case. Here's a comprehensive guide on how to open a GoPro waterproof case, keeping your device safe and ready for adventure.

GoPro's housing is designed to protect your camera from the challenges of extreme environments. To ensure your GoPro stays safe, let's dive into the step-by-step process of opening its waterproof case.

Preparing to Open the GoPro Waterproof Case

Before you start, find a flat and stable surface to work on. This will ensure you don't lose any small parts, and the process will be easier and more efficient.

AD
How To Open and Close The GoPro Hero 3 Waterproof Housing
How To Open and Close The GoPro Hero 3 Waterproof Housing
4 Reasons Why I Use A GoPro Waterproof Case On HERO Cameras
4 Reasons Why I Use A GoPro Waterproof Case On HERO Cameras
DIY GoPro Case - Hard Sided and Foam Lined
DIY GoPro Case - Hard Sided and Foam Lined

Gather your GoPro and its waterproof housing. If you're not using the standard housing that comes with your GoPro, ensure you have the correct waterproof housing for your specific model.

Identifying the Housing Latches

The GoPro waterproof housing features two latches on the back and two on the side. These latches secure the housing around your GoPro, ensuring a watertight seal.

How to Wash / Clean The Case & Backdoor - GoPro Tip #183 | MicBergsma
How to Wash / Clean The Case & Backdoor - GoPro Tip #183 | MicBergsma
How To Put Leash On Hero4's Case - GoPro Tip #404 | MicBergsma
How To Put Leash On Hero4's Case - GoPro Tip #404 | MicBergsma

Familiarize yourself with the location of these latches, as you'll need to release them to open the housing. On the back, the latches are positioned near the bottom, while the side latches are closer to the top.

Checking the Waterproof Housing for Damage

Before opening the housing, inspect it for any signs of damage, such as cracks or wear. If the housing is compromised, water could leak in, damaging your GoPro.

AD

It's also a good idea to check if the housing's double-sealed Smart Lens Cover is intact and undamaged, as this is another barrier protecting your GoPro from water, dust, and scratches.

Opening the GoPro Waterproof Case

Now that you're ready to open the housing, let's go through the process step by step.

For added convenience, consider using both hands for this process, as it can be quite delicate.

AD

Releasing the Back Latches

Begin by releasing the two back latches. Push the latches towards the center of the housing. You should hear a satisfying click as each latch disengages.

Once both latches are released, the back of the housing will separate slightly from the main body. This allows you to access the Side Release Locks.

Releasing the Side Release Locks

Now, with the back latches released, you can focus on the side release locks. These locks are positioned near the top of the housing, close to where the housing's lid meets the main body.

AD

Gently pull the housing's lid away from the main body while pushing the side release locks towards the center of the housing. You should feel and hear the locks disengage.

Separating the Housing Lid and Main Body

With both the back latches and side release locks disengaged, you can now separate the housing's lid from the main body.

Keep one hand on the main body and use your other hand to gently pull the lid away from the main body. The housing should now be completely open, revealing your GoPro's port and lens.

Securing Your GoPro Inside the Waterproof Case

Now that you know how to open the GoPro waterproof case, let's discuss how to secure your GoPro inside the housing to ensure a proper waterproof seal.

Before securing your GoPro, remove any protective lens caps or housing门, as these could interfere with the housing's watertight seal.

Aligning Your GoPro with the Housing

Line up your GoPro with the housing, ensuring that the camera's lens aligns with the housing's window. The housing's mounts, such as the Flat Mount, should also be facing the right direction.

Once your GoPro is properly aligned, slowly insert the camera into the housing. Make sure the GoPro's USB-C or mini-USB port is facing the correct direction, as this will dictate how you'll insert the housing's rear door and seal.

Securing the GoPro in the Housing

With your GoPro properly positioned in the housing, it's time to secure it in place. Start by gently pressing the latches back into their locked position. You should hear a satisfying clicking sound as the latches engage.

Next, firmly push the side release locks back into position, ensuring they click securely into place. This will lock the housing's lid onto the main body and create a watertight seal.

Congratulations! You've now successfully opened and secured your GoPro in its waterproof case. You're ready to capture stunning underwater footage or protect your GoPro from harsh environments. Happy adventuring!

AD