how to open equinox hood

How to Easily Open Equinox Hood: Step-by-Step Guide

By Ashley Williams
AD

Opening the hood of your Equinox can provide access to various components under the hood, enabling you to perform routine checks and minor maintenance. This article will guide you through the process, ensuring you can safely access the engine bay of your vehicle.

Before you begin, make sure your Equinox is parked on a level surface and the engine is cool to the touch. Working on a hot engine can cause burns and may damage components.

Locating the Hood Release

Your first step is to find the hood release. In most Equinox models, the hood release is located on the driver's side of the interior, either on the dashboard or the driver's door panel.

AD
New 2018 GM Chevrolet Equinox - How To Open The Hood (Release, Pop, Lift, Raise, Latch, Lever)
New 2018 GM Chevrolet Equinox - How To Open The Hood (Release, Pop, Lift, Raise, Latch, Lever)
2018 To 2022 GM Chevrolet Equinox SUV - How To Open The Hood & Access Engine Bay
2018 To 2022 GM Chevrolet Equinox SUV - How To Open The Hood & Access Engine Bay
Chevrolet Equinox How To Open Hood & Access Engine Bay 2018 2019 2020 2021 2022 2023 3rd Gen
Chevrolet Equinox How To Open Hood & Access Engine Bay 2018 2019 2020 2021 2022 2023 3rd Gen

In some cases, it might be a mechanical release handle or a pull tab. In newer models, it may be an electronic release button, often found near the driver's side windshield wiper controls. Consult your vehicle owner's manual for exact location if uncertain.

Interior Hood Release

If your Equinox has an interior hood release, follow these steps:

How To Open Hood: 2005 Chevrolet Equinox LS 3.4L V6
How To Open Hood: 2005 Chevrolet Equinox LS 3.4L V6
2018 To 2022 GM Chevrolet Equinox SUV - How To Open The Hood & Access Engine Bay
2018 To 2022 GM Chevrolet Equinox SUV - How To Open The Hood & Access Engine Bay

1. Press the release button or pull the handle. 2. Listen for a "click" or "pop" sound indicating the latch has been released. 3. Exit the vehicle and move to the front.

Exterior Hood Release

Some Equinox models may have an exterior hood release. This is typically a pull cord located under the front passenger side of the vehicle, near the grille.

AD

To use it, follow these steps:

1. Reach under the vehicle and locate the release cord. 2. Pull the cord firmly to unlock the hood. 3. Move to the front of the vehicle.

Opening the Hood

With the hood release engaged, you're ready to open the hood of your Equinox.

AD

locate the hood latch, typically in the center of the hood, near the bottom. It's usually covered by a large, sealed plastic piece.

Lifting the Hood

To lift the hood, follow these steps:

1. Reach up and grab the hood latch with both hands. 2. Pull upwards firmly, using the strength of your arms, not your back. 3. Continue pulling until the hood begins to lift.

AD

Securing the Hood

Once the hood is halfway up, you'll see a prop rod attached to the underside of the hood. This is designed to securely hold the hood open.

To use it, follow these steps:

1. Reach underneath the hood and locate the prop rod. 2. Pull the rod down until it clicks into place, supporting the hood and holding it open.

With the hood secured, you're now ready to perform routine checks or maintenance on your Equinox. Always ensure the hood is fully closed and the prop rod is stowed before driving.

If you're ever unsure about any part of the process, don't hesitate to consult your vehicle's owner manual or seek professional assistance. Regular maintenance will help keep your Equinox running smoothly and safely for years to come.

AD