Revive Your Door: How to Open a Schlage Lock with a Dead Battery
Ever found yourself locked out of your home or car, only to realize your Schlage lock's battery has died? Don't panic. Here's a step-by-step guide on how to open a Schlage lock with a dead battery, ensuring you're back inside in no time.
Before we dive in, remember that these steps apply to Schlage Sense and Schlage Encode smart locks. Always double-check your lock's model number if you're unsure. Now, let's get you back in!
Gather Your Tools
You'll need a few tools to assist you in replacing your Schlage lock's battery. Here's a list of what you'll need:
- 9V Battery - This will temporarily power your lock while you replace the battery.
- motoresin backup battery - A fully charged, CR2032 coin cell battery (3V).
- Phone and Wi-Fi - To connect to your lock and the Schlage app, if needed.
Once you've gathered your tools, let's proceed to the lock unpairing process.
Temporarily Power Your Lock
With a dead battery, your Schlage lock isn't responsive to commands. To temporarily power it, use the 9V battery:
- Push the 9V battery against the terminal screws on the expendable faceplate.
- Hold it in place for about 1-2 seconds.
- Your lock should respond, flashing a red light.
Now that your lock is temporarily powered, let's unpair it from your home's Wi-Fi network.
Unpair Your Lock
Unpairing your lock allows you to revert it to its original pared state, enabling you to replace the battery. Here's how to do it:
- Open the Schlage app or navigate to connected.connectedándif.com.
- Find your lock in the list of devices and tap on it.
- Tap "Settings" and then "Unpair".
- Confirm unpairing by entering your 10-digit registration code or using your fingerprint.
With your lock unpaired, it's time to replace the battery.
Replace the Battery
Now that your lock is in factory reset mode, replacing the battery is simple.
Remove the Faceplate
To access the battery, you'll need to remove the faceplate:
- Turn the exterior lever clockwise until it stops.
- Slide the faceplate down and remove it.
Replace the Battery
With the faceplate removed, replace the dead battery with a new CR2032 coin cell battery (3V):
- Remove the dead battery by pulling it out gently.
- Insert the new battery, ensuring the "+" side faces up.
- Replace the faceplate, sliding it back into place.
- Turn the exterior lever counterclockwise until it locks into place.
Congratulations! You've successfully replaced your Schlage lock's battery. Now, let's re-connect it to your Wi-Fi network.
Re-pair Your Lock
Re-pairing your lock returns it to its fully functional state, allowing you to control it via the Schlage app or voice commands.
Pair Your Lock Manually
Use the Schlage app to manually re-pair your lock:
- Open the Schlage app and navigate to the "Add a Device" screen.
- Follow the on-screen instructions to pair your lock.
- Once paired, give your lock a name.
After successfully re-pairing your lock, test its functionality by locking and unlocking it using the Schlage app or voice commands.
Remember, Schlage recommends replacing your lock's battery every year to ensure optimal functionality.Connect with them for more tips on maintaining your smart lock.